F5F Stay Refreshed Hardware Desktop The device shuts down after roughly two minutes.

The device shuts down after roughly two minutes.

The device shuts down after roughly two minutes.

Pages (2): 1 2 Next
L
Lozzylula
Member
63
07-21-2018, 10:54 AM
#1
AMD 9590fx Gigabyte ga-990fxa-ud3 r5 1050 ti 850 watt psu 1 500gb ssd will stay on and run in BIOS forever. As soon as I enter my Windows key to install it, the system shuts down and restarts itself. I just removed this PSU from my 2700x build for my sister because I have a new one coming tomorrow. I think it should work fine, but it’s making a strange whining sound that I haven’t heard before.
L
Lozzylula
07-21-2018, 10:54 AM #1

AMD 9590fx Gigabyte ga-990fxa-ud3 r5 1050 ti 850 watt psu 1 500gb ssd will stay on and run in BIOS forever. As soon as I enter my Windows key to install it, the system shuts down and restarts itself. I just removed this PSU from my 2700x build for my sister because I have a new one coming tomorrow. I think it should work fine, but it’s making a strange whining sound that I haven’t heard before.

O
OzziGamerBoi
Junior Member
21
07-27-2018, 08:08 PM
#2
Another audio interface for Windows 10. Many of these are available now. What’s causing this “whining” sound? It might resemble coil whine. If you can’t identify the source, one common fix people try is crafting a makeshift stethoscope using a small funnel and a plastic tube.
O
OzziGamerBoi
07-27-2018, 08:08 PM #2

Another audio interface for Windows 10. Many of these are available now. What’s causing this “whining” sound? It might resemble coil whine. If you can’t identify the source, one common fix people try is crafting a makeshift stethoscope using a small funnel and a plastic tube.

T
Tuetme
Senior Member
418
07-27-2018, 10:45 PM
#3
It looks like your PSU is running at 650 watts, which is quite old and worn out. You don’t have an ATX to SATA cable, and you’re worried the grounds might be mismatched. I’m not sure if this is the same PSU as others, but I’m concerned about your HDD.
T
Tuetme
07-27-2018, 10:45 PM #3

It looks like your PSU is running at 650 watts, which is quite old and worn out. You don’t have an ATX to SATA cable, and you’re worried the grounds might be mismatched. I’m not sure if this is the same PSU as others, but I’m concerned about your HDD.

R
rjconaway
Member
57
07-28-2018, 06:45 AM
#4
It's not recommended to connect cables to a PSU outside its intended use. This might be due to coil whine, which is mild but bothersome. The specific part causing the issue can affect performance. Check if the fan operates and look for swollen capacitors inside.
R
rjconaway
07-28-2018, 06:45 AM #4

It's not recommended to connect cables to a PSU outside its intended use. This might be due to coil whine, which is mild but bothersome. The specific part causing the issue can affect performance. Check if the fan operates and look for swollen capacitors inside.

B
bishopboys68
Posting Freak
899
07-28-2018, 08:16 AM
#5
I was caught up in something else and now I’ve purchased a 700-watt thermaltake for the 9590 setup and a Corsair 850-watt unit for my upcoming 2080/2700x build. Both seem to be from around 2 or 3 years ago, yet they’re both showing 12V output. The 6V rails are present, but one isn’t working at all. Fan lights are flickering due to power draw, so I’m avoiding both and just got the new ones. The old gear was a Seasonic SS-620gm PCF3 and an Ad-e850AE-A5. The new ones are a Thermaltake Thermaltake Smart 700W, 80+ White Certified PSU with ultra-quiet 120mm fan and ATX 12V V2.3/EPS 12V Active PFC power supply (model PS-SPD-0700NPCWUS-W). I also found Corsair RM850x, 850W, 80+ Gold Certified, fully modular (link).
B
bishopboys68
07-28-2018, 08:16 AM #5

I was caught up in something else and now I’ve purchased a 700-watt thermaltake for the 9590 setup and a Corsair 850-watt unit for my upcoming 2080/2700x build. Both seem to be from around 2 or 3 years ago, yet they’re both showing 12V output. The 6V rails are present, but one isn’t working at all. Fan lights are flickering due to power draw, so I’m avoiding both and just got the new ones. The old gear was a Seasonic SS-620gm PCF3 and an Ad-e850AE-A5. The new ones are a Thermaltake Thermaltake Smart 700W, 80+ White Certified PSU with ultra-quiet 120mm fan and ATX 12V V2.3/EPS 12V Active PFC power supply (model PS-SPD-0700NPCWUS-W). I also found Corsair RM850x, 850W, 80+ Gold Certified, fully modular (link).

V
vandalmal
Member
201
07-28-2018, 11:50 AM
#6
The reference "they" is unclear to you.
V
vandalmal
07-28-2018, 11:50 AM #6

The reference "they" is unclear to you.

P
Perndah
Junior Member
17
07-28-2018, 01:41 PM
#7
They were purchased recently, originally new, and have been used across several systems over the past few years due to budget constraints.
P
Perndah
07-28-2018, 01:41 PM #7

They were purchased recently, originally new, and have been used across several systems over the past few years due to budget constraints.

D
Darkfrost_64
Member
73
08-07-2018, 01:31 AM
#8
You are swapping out old, uncertain power supplies for newer or more worn ones.
D
Darkfrost_64
08-07-2018, 01:31 AM #8

You are swapping out old, uncertain power supplies for newer or more worn ones.

M
Mig56
Member
53
08-18-2018, 01:52 AM
#9
New ones, sorry for the bad grammar. The tricky part is they’re quite old, and the other issue is that one was used on my 2700x earlier today and now it can’t run anything—maybe the update finally took its toll...
M
Mig56
08-18-2018, 01:52 AM #9

New ones, sorry for the bad grammar. The tricky part is they’re quite old, and the other issue is that one was used on my 2700x earlier today and now it can’t run anything—maybe the update finally took its toll...

D
Donald_Trumpz
Member
246
08-20-2018, 02:13 AM
#10
The system is controlled by seasonic, but even with a "seasonic" cable it doesn't work with SSDs—it just fails to power them. I replaced one and another failed immediately, so I did some HDD testing because I didn’t want to waste another SSD. This has been a really frustrating day...
D
Donald_Trumpz
08-20-2018, 02:13 AM #10

The system is controlled by seasonic, but even with a "seasonic" cable it doesn't work with SSDs—it just fails to power them. I replaced one and another failed immediately, so I did some HDD testing because I didn’t want to waste another SSD. This has been a really frustrating day...

Pages (2): 1 2 Next