The device includes a video feature?
The device includes a video feature?
Asus M4n98td evo is the motherboard, I’m just curious about the video port. It seems pretty straightforward, right? I should be able to identify it on my own, but honestly I’m really struggling. I don’t understand what the orange connector is or what those two red ones mean either. I thought the first one was SATA, but then I realized that might not be correct.
It seems uncertain, but the highest red connector could be FireWire and possibly support video transmission.
The alternative model is Esata, which suggests there isn't a video output port available.
This device needs a GPU, which means it won't support video output.
I’ve removed the GPU yet there’s still no video output, which suggests the issue isn’t there. The RAM looks fine, but the CPU might be the problem—it doesn’t respond with beeps and there’s no video signal. Should I consider using SLI with this setup? The videos I’ve watched on YouTube all support SLI, yet none had just one card connected.
@StonerNixon check other video output ports on the graphics card. Verify all PCI-E power connectors are connected—they’re essential. The motherboard uses an nVidia nForce 980a chipset, so it doesn’t have built-in video. It supports SLi but isn’t necessary. Are you certain your RAM is functioning properly and hasn’t been previously tested or used elsewhere? What processor are you pairing with the board?
The RAM seems fine, but it's currently in a different setup. I didn’t leave anything connected before, and the GPU has been in other systems too. I remember the person didn’t mention it until they brought it in after two hours, saying it was salvaged from the curb. I cleaned it thoroughly. The CPU was wrapped in plastic and had some bent pins; one fell out during reattachment. I tested it both without and with the pin in place, and it worked similarly. This board might be damaged, but it’s still functional compared to my other dead ones—it powers on and stays on, though there’s no display. Try another card to see if it works better. The heat is high because connections are being made, and it actually functions properly. I’m a bit confused.