The CPU temperature is unclear, and the reason for the issue isn't obvious.
The CPU temperature is unclear, and the reason for the issue isn't obvious.
Your current temperatures are low. You're using a standard CPU cooler.
The cooler runs on silverstone PF120 AIO. Current temperatures reach 90°C and no components are active.
Do you have any thermal paste left on this device? The initial application might be dry, cracked, or uncertain. It’s best to use a moderately affordable MX-4 and reapply it between the CPU and cooler.
Recent adjustments were made a few days ago, functioning well for a week. Now it seems to be returning to previous problems.
Shows a faulty installation. Even a poor heatsink needs a CPU around 40°C during idle. Verify you're securing the waterblock properly with the right components for your CPU/mobo. Likely another check needed—confirm the pump is connected, as it typically draws SATA power.
idk if it's a clear indication, but it's possible. I had a bad mount with my recent build and didn't even realize it. But I was fiddling, lost a screw, and had to remove the AIO to remove it. Reapplied the AIO with fresh paste and my temps dropped 10 degrees at idle. It's annoying but worth a shot.
Generally, very high idle temperatures usually point to insufficient TIM or a faulty mount. Other factors are unlikely to be responsible. Perhaps another consideration... OP, did you remove the plastic from the water block? Some blocks have a protective sticker on the copper side. If you took it off, the remaining issues could be a poor mount, missing TIM, or a dead pump not connected.
First, gather all details such as the case, fans, radiators, and their placement. These issues often stem from: 1) wrong or too little thermal paste, 2) air pockets in the water loop, 3) fans not facing correctly or radiators misplaced, 4) poor case ventilation, and 5) coolers that are too small. Edited August 6, 2022 by An0maly_76 Updated with more info