The CPU is reducing its performance under stress testing.

F5F Stay Refreshed Power Users Overclocking The CPU is reducing its performance under stress testing.

jansuga
Member

12-06-2025, 06:29 AM

I've just increased my FX-4300 to 4.2 ghz at 1.4 v and adjusted the bus speed to 2000 mhz. However, during stability tests, the core speeds are dropping every 30 seconds. I don't understand why this is happening despite keeping the temperature below 60°C. Anyone can help me?

jansuga

12-06-2025, 06:29 AM #1

Cadariou
Posting Freak

835

12-06-2025, 08:23 AM

Have you verified the VRM temperature? Which tool can display the VRM temperature? Consider using HWINFO or AIDA64; if no sensor is detected, an infrared thermometer might be necessary.

Cadariou

12-06-2025, 08:23 AM #2

Have you verified the VRM temperature? Which tool can display the VRM temperature? Consider using HWINFO or AIDA64; if no sensor is detected, an infrared thermometer might be necessary.

Cusack
Junior Member

12-06-2025, 04:44 PM

Have you considered reducing your bus speed to the standard setting?

Cusack

12-06-2025, 04:44 PM #3

Have you considered reducing your bus speed to the standard setting?

antmat04
Member

220

12-07-2025, 06:51 PM

Have you checked VRM temp?

antmat04

12-07-2025, 06:51 PM #4

Have you checked VRM temp?

MS_TWINS
Member

230

12-09-2025, 02:05 PM

Have you attempted reducing your bus speed to the default setting?
No success so far. Also, the voltage remains consistently below 1.32.

MS_TWINS

12-09-2025, 02:05 PM #5

Have you attempted reducing your bus speed to the default setting?
No success so far. Also, the voltage remains consistently below 1.32.

chezpai
Member

12-10-2025, 02:48 PM

Have you verified the VRM temperature? What software allows me to monitor the VRM temperature?

chezpai

12-10-2025, 02:48 PM #6

Have you verified the VRM temperature? What software allows me to monitor the VRM temperature?

xXJaseiXx
Member

12-16-2025, 07:34 PM

Have you verified the VRM temperature? Which tool can display the VRM temperature? Consider using HWINFO or AIDA64; if no sensor is detected, an infrared thermometer might be necessary.

xXJaseiXx

12-16-2025, 07:34 PM #7

Have you verified the VRM temperature? Which tool can display the VRM temperature? Consider using HWINFO or AIDA64; if no sensor is detected, an infrared thermometer might be necessary.