F5F Stay Refreshed Hardware Desktop the cpu fan produces a distinct vibration sound at high speeds

the cpu fan produces a distinct vibration sound at high speeds

the cpu fan produces a distinct vibration sound at high speeds

S
Sponder
Member
77
07-01-2023, 05:49 PM
#1
I'm looking for some guidance on my recent upgrade to a gaming PC. I've been frustrated with the constraints of consoles, but now I can enjoy playing games with mods and exclusives that were previously inaccessible. The system I set up runs smoothly, and I'm monitoring temperatures closely since they vary with each game. During gameplay, the CPU typically stays between 60-70°C, except when high graphics settings are active, which can push it up to around 80°C—usually only for a short time before it drops back down. The GPU remains stable, never exceeding 60-70°C.

My main concern is the unusual vibration noise from the fan when I increase the fan speed to 80%. It doesn't happen consistently, but it stops when I lower the CPU fan to 100% or below 80%. I've noticed that gently pressing on the back where the CPU fan is located eliminates the noise. Moving the PC slightly can also affect whether the sound occurs, possibly due to lifting the front panel.

Since I'm new to PC building, I didn't assemble the system myself, but I've gathered all the relevant details. Please feel free to share any additional information you think would be helpful. Thank you! I hope this helps, and please let me know if my grammar needs improvement.
S
Sponder
07-01-2023, 05:49 PM #1

I'm looking for some guidance on my recent upgrade to a gaming PC. I've been frustrated with the constraints of consoles, but now I can enjoy playing games with mods and exclusives that were previously inaccessible. The system I set up runs smoothly, and I'm monitoring temperatures closely since they vary with each game. During gameplay, the CPU typically stays between 60-70°C, except when high graphics settings are active, which can push it up to around 80°C—usually only for a short time before it drops back down. The GPU remains stable, never exceeding 60-70°C.

My main concern is the unusual vibration noise from the fan when I increase the fan speed to 80%. It doesn't happen consistently, but it stops when I lower the CPU fan to 100% or below 80%. I've noticed that gently pressing on the back where the CPU fan is located eliminates the noise. Moving the PC slightly can also affect whether the sound occurs, possibly due to lifting the front panel.

Since I'm new to PC building, I didn't assemble the system myself, but I've gathered all the relevant details. Please feel free to share any additional information you think would be helpful. Thank you! I hope this helps, and please let me know if my grammar needs improvement.

G
GoDFist
Junior Member
17
07-03-2023, 09:40 PM
#2
It seems the cooling system might not be fully engaged. Could you clarify if it's the CPU fan or the case fan? I wasn't sure from your description.
G
GoDFist
07-03-2023, 09:40 PM #2

It seems the cooling system might not be fully engaged. Could you clarify if it's the CPU fan or the case fan? I wasn't sure from your description.

N
New_air_games
Member
208
07-03-2023, 09:54 PM
#3
The cooling fan that keeps the CPU cool is connected to the processor itself. It’s the CPU fan. Thanks for your reply. I removed the front panel of the case, inspected all the screws, and they no longer hold tightly.
N
New_air_games
07-03-2023, 09:54 PM #3

The cooling fan that keeps the CPU cool is connected to the processor itself. It’s the CPU fan. Thanks for your reply. I removed the front panel of the case, inspected all the screws, and they no longer hold tightly.

P
Perithia
Junior Member
37
07-05-2023, 12:26 AM
#4
I haven't encountered this problem recently, so don't be silly, but is the manufacturer's logo sticker positioned at the center of the cooling fan? I've seen cases where it was missing, which could lead to complications at high speeds. This is just a guess, purely curious.
P
Perithia
07-05-2023, 12:26 AM #4

I haven't encountered this problem recently, so don't be silly, but is the manufacturer's logo sticker positioned at the center of the cooling fan? I've seen cases where it was missing, which could lead to complications at high speeds. This is just a guess, purely curious.

A
Argile
Member
53
07-05-2023, 03:19 AM
#5
Your CPU fan might be slightly misaligned or the bearings could be worn. Budget fans sometimes show unusual vibrations or sound. Swapping them is inexpensive and straightforward. You can buy quality fans for just a few dollars or pounds. Noctua is my preferred brand, though many alternatives exist.
A
Argile
07-05-2023, 03:19 AM #5

Your CPU fan might be slightly misaligned or the bearings could be worn. Budget fans sometimes show unusual vibrations or sound. Swapping them is inexpensive and straightforward. You can buy quality fans for just a few dollars or pounds. Noctua is my preferred brand, though many alternatives exist.

N
Nucleoside
Member
53
07-07-2023, 03:56 AM
#6
no sticker is attached to my fan. I thought about buying one and putting it in myself, but I’m worried I can’t afford another £1400 for a PC if something goes wrong. It took me a long time to save up enough, and £1400 feels like a huge amount. I’m mainly afraid I’ll make a mistake.
N
Nucleoside
07-07-2023, 03:56 AM #6

no sticker is attached to my fan. I thought about buying one and putting it in myself, but I’m worried I can’t afford another £1400 for a PC if something goes wrong. It took me a long time to save up enough, and £1400 feels like a huge amount. I’m mainly afraid I’ll make a mistake.

C
Crazydog300
Senior Member
599
07-08-2023, 03:45 AM
#7
Thank you for your input. Is the vibration seen as a significant issue requiring immediate attention?
C
Crazydog300
07-08-2023, 03:45 AM #7

Thank you for your input. Is the vibration seen as a significant issue requiring immediate attention?

M
mimanuchi
Junior Member
3
07-08-2023, 10:21 AM
#8
It's just frustrating. You can find tutorials on YouTube, but it usually takes only a few short clips and unplugging the header from the motherboard.
M
mimanuchi
07-08-2023, 10:21 AM #8

It's just frustrating. You can find tutorials on YouTube, but it usually takes only a few short clips and unplugging the header from the motherboard.

K
Kaisetsu
Senior Member
651
07-10-2023, 12:19 PM
#9
thank you all for your help i really appreciate it. i will look at videos see if makes me feel a bit more comfortable im glad its not a major issue it has set aside some of my worries. this website is amazing and really helpful will definitely keep coming back here to ask my questions thank you again ^_^
K
Kaisetsu
07-10-2023, 12:19 PM #9

thank you all for your help i really appreciate it. i will look at videos see if makes me feel a bit more comfortable im glad its not a major issue it has set aside some of my worries. this website is amazing and really helpful will definitely keep coming back here to ask my questions thank you again ^_^