The CPU cable has an incorrect pin count, will it function?
The CPU cable has an incorrect pin count, will it function?
I own this PSU:
https://www.amazon.com/PowerSpec-Cr...8B...=UTF8&th=1
And this motherboard:
https://www.amazon.com/ASUS-Z790-P-...mz...e904010ad0
The problem is the CPU cable is 6 pin male to 4 x 4 male, whereas my motherboards require 8 x 4 female. I bought this hoping it would help, but I'm more used to non-modular setups:
https://www.amazon.com/dp/B093Q3HZCM?psc...ct_details
1st, it's probably not necessary to use the adapter
2nd, ensure the appropriate cables are inserted at the right place on both the PSU and the motherboard
You might be using the incorrect end for the motherboard or the wrong cable from the PSU
use the 8pin (4x4pin) connection method
uncertain about the meaning, the CPU cord is Male to Male
one side has 8 pins while the other end features a 2 4-pin connector that appears as shown
So it's 4+4, not 4x4? The way you're talking about it is a bit unclear; modular power cables are never labeled that way since the connection to the PSU is unique, not standardized. What you mean is that your motherboard's CPU port has both an 8-pin and a 4-pin port—just use the 8-pin unless you're pushing overclocking limits. You don't have to fill in both. Stay away from using adapters on a PSU like they're dangerous.
Yes, that generally works well, but avoid being too aggressive with overclocking since it requires more power. If you do, ensure you have a better PSU with additional cables that genuinely supply extra power, rather than using an adapter to steal power.
Usually I'm quite strict with PSUs, but the GFM PowerSpecs aren't that bad after all. I wouldn't buy one if I were replacing a new PSU. The inexpensive fan is a downside, and the standards are far from the best for top-tier units, but a well-built PSU with proper design can still perform quite well.