F5F Stay Refreshed Hardware Desktop The computer won't start and you're having to turn it off and on repeatedly.

The computer won't start and you're having to turn it off and on repeatedly.

The computer won't start and you're having to turn it off and on repeatedly.

A
austinp44
Member
73
01-07-2023, 06:17 PM
#1
I’ve checked everything and cleaned all components. The system won’t boot after cleaning. I tried resetting the CMOS, used a jumper method, and even replaced the RAM. Now it’s still not working. I’m unsure if the PSU or motherboard is faulty. What should I do next?
A
austinp44
01-07-2023, 06:17 PM #1

I’ve checked everything and cleaned all components. The system won’t boot after cleaning. I tried resetting the CMOS, used a jumper method, and even replaced the RAM. Now it’s still not working. I’m unsure if the PSU or motherboard is faulty. What should I do next?

A
artick788
Junior Member
42
01-08-2023, 12:46 AM
#2
The motherboard model was omitted from the list. Please confirm the specific model and ensure no PSU name is tested or replaced.
A
artick788
01-08-2023, 12:46 AM #2

The motherboard model was omitted from the list. Please confirm the specific model and ensure no PSU name is tested or replaced.

T
Thunderbert
Junior Member
11
01-08-2023, 08:09 AM
#3
Gigabyte X79 upgraded Rex Cool 600 watt power supply
T
Thunderbert
01-08-2023, 08:09 AM #3

Gigabyte X79 upgraded Rex Cool 600 watt power supply

P
PenDark
Junior Member
10
01-08-2023, 11:22 AM
#4
Great setup. Verify the CMOS battery is functioning properly and matches its rated voltage. If not, swap it out. Clearing the CMOS will reset it when you replace the coin cell. Consider using a different power supply if possible. You might borrow one from another PC, a family member, or a neighbor—starting there could help.
P
PenDark
01-08-2023, 11:22 AM #4

Great setup. Verify the CMOS battery is functioning properly and matches its rated voltage. If not, swap it out. Clearing the CMOS will reset it when you replace the coin cell. Consider using a different power supply if possible. You might borrow one from another PC, a family member, or a neighbor—starting there could help.

K
kleinne_meid
Member
228
01-08-2023, 06:39 PM
#5
No one in my household uses just a Mac, so there’s no family history of PC-only Macs. My motherboard might be faulty, and I’m considering replacing the PSU, though it’s still unclear what’s wrong. If the PSU is confirmed as the issue, I’ll go ahead and buy a new one.
K
kleinne_meid
01-08-2023, 06:39 PM #5

No one in my household uses just a Mac, so there’s no family history of PC-only Macs. My motherboard might be faulty, and I’m considering replacing the PSU, though it’s still unclear what’s wrong. If the PSU is confirmed as the issue, I’ll go ahead and buy a new one.

S
SirHowad
Junior Member
42
01-09-2023, 03:08 AM
#6
I prefer not to waste money unless forced. As mentioned, I’d start with the coin battery offer first. Also, a PSU might trigger restarts—so I’m considering an alternative that doesn’t cost anything.
S
SirHowad
01-09-2023, 03:08 AM #6

I prefer not to waste money unless forced. As mentioned, I’d start with the coin battery offer first. Also, a PSU might trigger restarts—so I’m considering an alternative that doesn’t cost anything.

J
JoeDub23
Member
129
01-13-2023, 03:06 AM
#7
I replaced the CMOS battery and tried again, but it didn't fix the issue.
J
JoeDub23
01-13-2023, 03:06 AM #7

I replaced the CMOS battery and tried again, but it didn't fix the issue.

C
CROSSBOWWEAPON
Member
164
01-13-2023, 10:58 AM
#8
It seems the issue might be with the board or PSU (possibly CPU or RAM too). Here are some points to consider:
- Check the board or PSU connection.
- Verify the CPU installation.
- Try a different memory slot.
- Use another CPU model.
- Ensure the boot loop is not active.
C
CROSSBOWWEAPON
01-13-2023, 10:58 AM #8

It seems the issue might be with the board or PSU (possibly CPU or RAM too). Here are some points to consider:
- Check the board or PSU connection.
- Verify the CPU installation.
- Try a different memory slot.
- Use another CPU model.
- Ensure the boot loop is not active.

L
l_h_y
Member
105
01-13-2023, 11:43 AM
#9
I attempted to reset the CMOS one slot at a time, covering all CPU cooler areas and cleaning the RAM slots, including reseating the CPU. However, my PC still doesn’t show any changes. The restart didn’t update the socket, and no bent pins were detected.
L
l_h_y
01-13-2023, 11:43 AM #9

I attempted to reset the CMOS one slot at a time, covering all CPU cooler areas and cleaning the RAM slots, including reseating the CPU. However, my PC still doesn’t show any changes. The restart didn’t update the socket, and no bent pins were detected.