F5F Stay Refreshed Hardware Desktop The computer starts on its own.

The computer starts on its own.

The computer starts on its own.

Pages (2): 1 2 Next
N
NicolleSpacki
Member
173
11-05-2016, 07:45 PM
#1
Hey! I've tried to figure out what's going on with your setup. Here’s what I’ve done so far:

- Used a surge protector with a switch, turning it off at night.
- Checked for CMOS changes and deep sleep settings.
- Restarted the PC and tried disabling wake-on-LAN.
- Performed a clean Windows installation.
- Looked into what caused the PC to wake up (it says 0).
- Restored from AC power loss, but it was off.
- Noted that it works after shutting down via the shutdown button and with Shift+shutdown.
- Built the system in January, started noticing these changes in May.

Let me know if you want to share more details!
N
NicolleSpacki
11-05-2016, 07:45 PM #1

Hey! I've tried to figure out what's going on with your setup. Here’s what I’ve done so far:

- Used a surge protector with a switch, turning it off at night.
- Checked for CMOS changes and deep sleep settings.
- Restarted the PC and tried disabling wake-on-LAN.
- Performed a clean Windows installation.
- Looked into what caused the PC to wake up (it says 0).
- Restored from AC power loss, but it was off.
- Noted that it works after shutting down via the shutdown button and with Shift+shutdown.
- Built the system in January, started noticing these changes in May.

Let me know if you want to share more details!

D
Dr_Fred
Member
206
11-27-2016, 06:15 AM
#2
System specifications are ready. Regarding your question, yes, it can power on independently even when the connected surge protector is not active.
D
Dr_Fred
11-27-2016, 06:15 AM #2

System specifications are ready. Regarding your question, yes, it can power on independently even when the connected surge protector is not active.

I
Isstin
Junior Member
23
12-04-2016, 11:49 AM
#3
CPU model: Ryzen 5600 with cooling unit 226xt, MOBO: Asrock b450m pro4 r2.0 GPU: xfx 6700 RAM: Gskill aegis 3000, 2x8gb PSU: seasonic b12 750W SSD: Kioxia exceria g2 1tb Added an Asus AX1800 wireless card. Edited August 9, 2024 by Shazhadaan. Note: It won't function properly when the surge protector is turned off.
I
Isstin
12-04-2016, 11:49 AM #3

CPU model: Ryzen 5600 with cooling unit 226xt, MOBO: Asrock b450m pro4 r2.0 GPU: xfx 6700 RAM: Gskill aegis 3000, 2x8gb PSU: seasonic b12 750W SSD: Kioxia exceria g2 1tb Added an Asus AX1800 wireless card. Edited August 9, 2024 by Shazhadaan. Note: It won't function properly when the surge protector is turned off.

T
Techswarm91
Member
65
12-04-2016, 02:46 PM
#4
When you press the power button, it remains on. It can also switch on by itself after being turned off this way.
T
Techswarm91
12-04-2016, 02:46 PM #4

When you press the power button, it remains on. It can also switch on by itself after being turned off this way.

L
LinkBoxia
Member
91
12-04-2016, 10:56 PM
#5
I’ll attempt this.
L
LinkBoxia
12-04-2016, 10:56 PM #5

I’ll attempt this.

F
FunnyFactions
Junior Member
33
12-09-2016, 08:10 AM
#6
Follow the guidance to open Device Manager. Disable mouse and keyboard options. Verify advanced power-plan configurations if they might trigger the issue.
F
FunnyFactions
12-09-2016, 08:10 AM #6

Follow the guidance to open Device Manager. Disable mouse and keyboard options. Verify advanced power-plan configurations if they might trigger the issue.

Z
Zockerboy_05
Junior Member
7
12-09-2016, 05:02 PM
#7
We'll review the outcomes next.
Z
Zockerboy_05
12-09-2016, 05:02 PM #7

We'll review the outcomes next.

M
Mottcru2
Junior Member
48
12-09-2016, 08:38 PM
#8
This mainly affects sleep settings but should also apply to shutdown. That could be related to power plans or configurations that put the PC into sleep mode instead of a full shutdown, unless I'm misinterpreting.
M
Mottcru2
12-09-2016, 08:38 PM #8

This mainly affects sleep settings but should also apply to shutdown. That could be related to power plans or configurations that put the PC into sleep mode instead of a full shutdown, unless I'm misinterpreting.

J
Jelmer2006
Junior Member
10
12-11-2016, 08:36 AM
#9
I updated every power plan setting, so it shouldn't activate or turn on, though we'll check.
J
Jelmer2006
12-11-2016, 08:36 AM #9

I updated every power plan setting, so it shouldn't activate or turn on, though we'll check.

T
Tavado
Senior Member
505
12-13-2016, 01:28 AM
#10
It’s more likely you should check the BIOS configuration. Focus on what happens after a power outage—your settings probably set to boot the PC again after failure. (Useful for always-on systems). Adjust it so it doesn’t power on automatically or to recall the previous state. Advanced > Onboard Devices Configuration > Restore On AC Power Loss > Power On Couldn’t get an Asrock BIOS screenshot, but it should be described similarly.
T
Tavado
12-13-2016, 01:28 AM #10

It’s more likely you should check the BIOS configuration. Focus on what happens after a power outage—your settings probably set to boot the PC again after failure. (Useful for always-on systems). Adjust it so it doesn’t power on automatically or to recall the previous state. Advanced > Onboard Devices Configuration > Restore On AC Power Loss > Power On Couldn’t get an Asrock BIOS screenshot, but it should be described similarly.

Pages (2): 1 2 Next