The computer is operational yet there is no visible output.
The computer is operational yet there is no visible output.
Hello everyone, I recently encountered an issue where my PC starts up but no display appears. The BIOS logo doesn’t boot either. In Task Manager and Device Manager, the GPU is recognized, but I used TeamViewer mobile to check.
https://imgur.com/a/uy7iz9H
View: https://imgur.com/a/uy7iz9H
I attempted to clean the PCIe x16 slot, swapped RAM sticks, reset and replaced the CMOS battery with a new one (CR 2025 - 3V), upgraded the PSU to 650W, but nothing resolved the problem.
My specifications:
CPU: Ryzen 5 2600
RAM: (2x8GB) Crucial Ballistix
MB: Asus Prime A320M-K
GPU: Sapphire RX 580 8GB (Pulse)
P.S.: Please forgive any mistakes in the description—I’m still working on my English.
How is your monitor linked to the PC—DVI, VGA, HDMI, or DisplayPort?
Which specific model does your monitor have?
Have you verified that your monitor isn’t using the incorrect display output from your PC?
As per the quick start guide for your motherboard, located here, integrated graphics are supported through HDMI. Review the document you linked and check the bottom of the final page—it will show the I/O panel and mark the HDMI port location. Attempt connecting a monitor there to verify the signal.
The board indeed has an HDMI port since it supports CPUs with integrated graphics. However, the CPU (Ryzen 5 2600) lacks a GPU, meaning even if you connect something to that port, there would be no output. Regarding the current issue, could you attempt using a different GPU or test your existing one on another system? I'm certain you've already tried swapping the HDMI cables and checked with other displays (though it's unlikely both would fail simultaneously).