F5F Stay Refreshed Hardware Desktop The ASUS Z790-E gaming CPU fan header isn't functioning properly.

The ASUS Z790-E gaming CPU fan header isn't functioning properly.

The ASUS Z790-E gaming CPU fan header isn't functioning properly.

Pages (2): 1 2 Next
C
crosser146
Member
63
06-23-2022, 10:43 PM
#1
You're facing an issue with CPU fan detection on your ASUS Z790-E Gaming setup. It seems the system isn't recognizing the fans, even after booting up. You've already tried Corsair AIOs and adjusted BIOS settings to ignore the warning. Since neither method works, it might help to double-check the fan connections, ensure the fans are spinning properly, or try a different power supply if possible. If the problem persists, contacting ASUS for warranty support would be a good next step. Let me know if you need more guidance!
C
crosser146
06-23-2022, 10:43 PM #1

You're facing an issue with CPU fan detection on your ASUS Z790-E Gaming setup. It seems the system isn't recognizing the fans, even after booting up. You've already tried Corsair AIOs and adjusted BIOS settings to ignore the warning. Since neither method works, it might help to double-check the fan connections, ensure the fans are spinning properly, or try a different power supply if possible. If the problem persists, contacting ASUS for warranty support would be a good next step. Let me know if you need more guidance!

S
SaySaeqo
Member
139
06-24-2022, 12:43 AM
#2
The fans and pump connect to specific headers: cooler fans to the cpu_fan header and the pump to the aio_pump header.
S
SaySaeqo
06-24-2022, 12:43 AM #2

The fans and pump connect to specific headers: cooler fans to the cpu_fan header and the pump to the aio_pump header.

M
Matke04
Posting Freak
825
06-24-2022, 08:10 AM
#3
The fans are connected to the commander core, pro, and my lighting node pro. The aio only has two power cables—one for the commander core and another for the CPU fan header. The issue keeps happening even after it goes to the CPU fan header. I’m looking for suggestions on testing the motherboard’s CPU fan header, possibly since the new board might have a faulty header.
M
Matke04
06-24-2022, 08:10 AM #3

The fans are connected to the commander core, pro, and my lighting node pro. The aio only has two power cables—one for the commander core and another for the CPU fan header. The issue keeps happening even after it goes to the CPU fan header. I’m looking for suggestions on testing the motherboard’s CPU fan header, possibly since the new board might have a faulty header.

W
WhitePurpleFox
Junior Member
46
06-24-2022, 12:18 PM
#4
Try it by connecting a fan to the cpu_fan header.
W
WhitePurpleFox
06-24-2022, 12:18 PM #4

Try it by connecting a fan to the cpu_fan header.

B
BeeWen
Junior Member
3
07-06-2022, 09:25 AM
#5
Many of these AIOs can connect via a USB header on the motherboard, enabling control through iCue.
B
BeeWen
07-06-2022, 09:25 AM #5

Many of these AIOs can connect via a USB header on the motherboard, enabling control through iCue.

B
BadMemory
Member
206
07-10-2022, 02:46 AM
#6
Thanks! I appreciate the feedback. Now I need to figure out the mistakes in configuring my Corsair fans and AIO.
B
BadMemory
07-10-2022, 02:46 AM #6

Thanks! I appreciate the feedback. Now I need to figure out the mistakes in configuring my Corsair fans and AIO.

B
banshee45
Senior Member
726
07-10-2022, 07:36 AM
#7
I put it in place and refreshed the commander core. Next, I added the LCD upgrade package for the display. All USB connectors are connected to the motherboard or Commander Pro. Any tips would be great!
B
banshee45
07-10-2022, 07:36 AM #7

I put it in place and refreshed the commander core. Next, I added the LCD upgrade package for the display. All USB connectors are connected to the motherboard or Commander Pro. Any tips would be great!

L
lookatmyskill2
Member
102
07-12-2022, 08:31 AM
#8
The device should connect to the Commander Pro via the PC's USB header as described in the instructions. If it appears in iCue but remains unresponsive, update the firmware through iCue.
L
lookatmyskill2
07-12-2022, 08:31 AM #8

The device should connect to the Commander Pro via the PC's USB header as described in the instructions. If it appears in iCue but remains unresponsive, update the firmware through iCue.

K
ksamp3
Member
60
07-22-2022, 10:34 AM
#9
Firmware is current. The pump is connected to the Commander Pro, and the USB header points to the Commander Core. I'm attempting to connect it straight to the motherboard, but it isn't appearing in the system tray at all.
K
ksamp3
07-22-2022, 10:34 AM #9

Firmware is current. The pump is connected to the Commander Pro, and the USB header points to the Commander Core. I'm attempting to connect it straight to the motherboard, but it isn't appearing in the system tray at all.

Z
zombistruc22
Junior Member
39
07-24-2022, 02:24 AM
#10
It looks like they strongly prefer connecting the screen directly to the motherboard rather than using the Commander Pro. The exact reason isn’t clear, but both the manual and the instruction video show the screen going to the motherboard.
Z
zombistruc22
07-24-2022, 02:24 AM #10

It looks like they strongly prefer connecting the screen directly to the motherboard rather than using the Commander Pro. The exact reason isn’t clear, but both the manual and the instruction video show the screen going to the motherboard.

Pages (2): 1 2 Next