F5F Stay Refreshed Hardware Desktop The Asus ROG GL503V isn't charging or turning on.

The Asus ROG GL503V isn't charging or turning on.

The Asus ROG GL503V isn't charging or turning on.

Pages (2): 1 2 Next
F
Freckish
Junior Member
4
10-01-2025, 12:41 PM
#1
Hello, I'm working on fixing my ASUS ROG laptop with the model "GL503V". It won't charge and won't power on either. The charging light stays off, and the indicator doesn’t illuminate. I confirmed the power cable is delivering 20v as expected. I removed the CMOS battery and held the power button, then swapped it out for a new one, but that didn’t resolve the issue. When I turned it on, a faint clicking sound was audible, so I investigated further. After disassembling the device, I found the noise coming from a specific spot. Could this be the source of the problem? Any advice or alternative steps would be appreciated. I’m new to laptop troubleshooting.
F
Freckish
10-01-2025, 12:41 PM #1

Hello, I'm working on fixing my ASUS ROG laptop with the model "GL503V". It won't charge and won't power on either. The charging light stays off, and the indicator doesn’t illuminate. I confirmed the power cable is delivering 20v as expected. I removed the CMOS battery and held the power button, then swapped it out for a new one, but that didn’t resolve the issue. When I turned it on, a faint clicking sound was audible, so I investigated further. After disassembling the device, I found the noise coming from a specific spot. Could this be the source of the problem? Any advice or alternative steps would be appreciated. I’m new to laptop troubleshooting.

B
B3457_Viper123
Junior Member
35
10-01-2025, 02:29 PM
#2
I faced an issue with a Lenovo Y580 after attempting to use Lenovo software for battery calibration. It turned out the Lenovo made shortcuts by removing components from the power circuitry during the process, which caused damage. The laptop became vulnerable to any electrical input, requiring replacement of several parts.
B
B3457_Viper123
10-01-2025, 02:29 PM #2

I faced an issue with a Lenovo Y580 after attempting to use Lenovo software for battery calibration. It turned out the Lenovo made shortcuts by removing components from the power circuitry during the process, which caused damage. The laptop became vulnerable to any electrical input, requiring replacement of several parts.

L
Legend_Wayne
Member
76
10-01-2025, 04:17 PM
#3
If it makes a click there's probably a short somewhere. I once fixed a laptop that had a shorted ceramic cap close to the RAM.
L
Legend_Wayne
10-01-2025, 04:17 PM #3

If it makes a click there's probably a short somewhere. I once fixed a laptop that had a shorted ceramic cap close to the RAM.

W
Weeflie
Junior Member
9
10-03-2025, 03:19 AM
#4
I believe that too, though I assumed the power cable includes a safety feature that blocks current if a short is found. It seems you'd need to reattach the cable to restore power.
W
Weeflie
10-03-2025, 03:19 AM #4

I believe that too, though I assumed the power cable includes a safety feature that blocks current if a short is found. It seems you'd need to reattach the cable to restore power.

M
Maximo_2016
Junior Member
10
10-04-2025, 09:44 PM
#5
You might be mistaken about Asus keeping prices low for the components in their ROG products...
M
Maximo_2016
10-04-2025, 09:44 PM #5

You might be mistaken about Asus keeping prices low for the components in their ROG products...

B
Beavz
Member
208
10-20-2025, 10:47 PM
#6
The brief identification is expected to occur on the mainboard, stopping early when the power demand nears its capacity.
B
Beavz
10-20-2025, 10:47 PM #6

The brief identification is expected to occur on the mainboard, stopping early when the power demand nears its capacity.

D
Destroyer1091
Junior Member
6
10-25-2025, 12:41 PM
#7
Testing with a thermal camera can help identify hot spots and eliminate a short circuit.
D
Destroyer1091
10-25-2025, 12:41 PM #7

Testing with a thermal camera can help identify hot spots and eliminate a short circuit.

S
Sheep_Boss
Junior Member
30
11-09-2025, 05:19 AM
#8
Couldn't anticipate such a rapid response. Probably switches on and shuts off in microseconds, with the sound of a brief surge in the VRM inductors during the click.
S
Sheep_Boss
11-09-2025, 05:19 AM #8

Couldn't anticipate such a rapid response. Probably switches on and shuts off in microseconds, with the sound of a brief surge in the VRM inductors during the click.

J
jammintan418
Member
192
11-10-2025, 07:26 PM
#9
Inspect the capacitors on the board, focusing on the power circuit area.
J
jammintan418
11-10-2025, 07:26 PM #9

Inspect the capacitors on the board, focusing on the power circuit area.

S
SayNoToNWO
Posting Freak
879
11-12-2025, 07:11 AM
#10
Attempted it today, and you're correct. Unsure about the next steps.
S
SayNoToNWO
11-12-2025, 07:11 AM #10

Attempted it today, and you're correct. Unsure about the next steps.

Pages (2): 1 2 Next