The application is currently restricted from utilizing graphics hardware.
The application is currently restricted from utilizing graphics hardware.
Hi, this isn't a new issue, but it's been happening for a while now. Recently, I was using an overclock with a +70Mhz GPU and +36Mhz memory settings. It was a minor adjustment, and they mentioned it should be fine. While playing Fallout 4 at 2k with maximum settings, the game dropped to around 100 frames per second and 80 fps, then crashed again. After restarting, it started running at 20 fps but the GPU wasn't performing well. I restarted the PC and tried opening the game again, but it kept freezing and making a beep before shutting down completely. The power supply was turned off, and nothing seemed to be wrong. No artifacts were visible.
ZOTAC 980TI Amp Extreme edition
Intel i7 6700k OC to 4.5GHz
32Gb hyper X 2133Mhz
Asus z170 motherboard
I attempted a clean driver reinstallation.
psaintmalo :
This isn't the first time I'm facing this issue, but it hasn't been a major problem before. Recently, during an overclock (gpu offset +70Mhz, memory offset +36Mhz), I made a small adjustment. I was playing Fallout 4 at full settings with 2k, achieving around 100-80 FPS. The game crashed after that. When I restarted and reopened it, it started running at 20 FPS, but the GPU wasn't performing well. After turning off the power supply, everything seemed normal except for no artifacts appearing.
ZOTAC 980TI Amp Extreme edition
Intel i7 6700k OC to 4.5GHz
32Gb hyper X 2133Mhz
Asus z170 motherboard
I tried...
psaintmalo :
Hi, this is not a new question, I am having this problem for a while now, but normally its not that a big deal but today I was with a overclock(+70Mhz Gpu offset, +36Mhz memory offset), a slight overclock, or at least they say so, and I was playing a game(Fallout 4) at 2k everything maxed out 100-80 fps and it crashed, again, but I just reopend the game and it started to run at 20 fps and the gpu was not working pretty hard, I restarted and opened again and it just crashed with a kind of beep and I could not do anything, it froze, I turned of the power supply and on and everything seems fine, I do not see any artifacs.
ZOTAC 980TI Amp Extreme edition
Intel i7 6700k OC to 4.5GHz
32Gb hyper X 2133Mhz
Asus z170 motherboard
I tried clean reinstalling the drivers.
Voltage, the number one killer of an Overclock. Try increasing your voltage in your card, should help to keep it stable through the overclock. Increase the voltage slowly, between .001 and .01 increments.