The access point router is causing a decrease in internet performance.
The access point router is causing a decrease in internet performance.
I own an old D-Link router (see photo). I thought it could work as a wired access point to connect my sister’s PC directly to the internet via Ethernet instead of Wi-Fi for better stability. Initially: MainRouter_____My PC … After: MainRouter_____dlink_____My PC … Sister’s PC … Etc. However, the wired link is slow. Usually I see about 50/50 speeds in speed tests, but now both our PCs are consistently 10/10. Other devices still get 50/50 through Wi-Fi or Ethernet from the main router. What factors limit this speed? Does enabling access point mode reduce the 100Mbps port to 10Mbps? Or could the new Ethernet cable actually slow things down? Any advice would be appreciated.
Review the router’s admin panel for power-saving configurations that cap port speeds at 10 Mbit instead of 100 Mbit. It’s unlikely a faulty or damaged cable would cause such a drastic reduction unless it was extremely poor quality. ~Note: Because you likely don’t require a router, consider swapping it for an inexpensive 4-port switch instead.
The outdated router functions as a switch performing its current tasks, eliminating the need for a 4-port switch unless you require a gigabit LAN connection. This approach saves costs and reduces electronic waste.
1.) Verify your router's QOS settings if available; they may be enabled.
2.) As a final step, reset the old router to factory defaults if necessary, clearing any previous configurations.
3.) Ensure you don’t utilize the WAN port of the old device.
4.) Turn off DHCP, firewall, NAT, and DNS—DHCP management will now fall to the main router. For guidance, refer to instructions for converting an old router into a switch, including noting its model number.
I understand this point. It's just another option if the current router fails. You should definitely look for a used 100 Mbit switch at a low price.