F5F Stay Refreshed Hardware Desktop The 5800X3D reaches 91.5°C during operation with water cooling.

The 5800X3D reaches 91.5°C during operation with water cooling.

The 5800X3D reaches 91.5°C during operation with water cooling.

Pages (3): 1 2 3 Next
M
mcbudder2004
Senior Member
687
06-21-2022, 12:33 AM
#1
I verified the mounting pressure, checked the thermal paste, and found four air bubbles. The GPU is cooling down to a peak temperature of 50°C. The Kombuster CPU reaches 90°C in just a few seconds. I’ve noticed 80°C under air cooling, which seems unusually high compared to what others report online. The 13059 Cinebench score appears a bit lower than some results.
M
mcbudder2004
06-21-2022, 12:33 AM #1

I verified the mounting pressure, checked the thermal paste, and found four air bubbles. The GPU is cooling down to a peak temperature of 50°C. The Kombuster CPU reaches 90°C in just a few seconds. I’ve noticed 80°C under air cooling, which seems unusually high compared to what others report online. The 13059 Cinebench score appears a bit lower than some results.

S
stockchief7
Member
172
06-22-2022, 06:50 AM
#2
The specific model of the water cooler is not mentioned.
S
stockchief7
06-22-2022, 06:50 AM #2

The specific model of the water cooler is not mentioned.

B
Bobi13
Junior Member
2
06-22-2022, 11:53 AM
#3
Here are the updated specifications:

System Requirements:
- Full system configuration details provided above.
B
Bobi13
06-22-2022, 11:53 AM #3

Here are the updated specifications:

System Requirements:
- Full system configuration details provided above.

X
xXSuperNovaXx
Posting Freak
811
06-22-2022, 08:57 PM
#4
ekwb pump rez combo paired with corsair rads. x570 taichi 5800x3d 3080 fe 32 gb ram, two 480 2 360 1000 watt psu.
X
xXSuperNovaXx
06-22-2022, 08:57 PM #4

ekwb pump rez combo paired with corsair rads. x570 taichi 5800x3d 3080 fe 32 gb ram, two 480 2 360 1000 watt psu.

M
mase89
Junior Member
1
06-23-2022, 09:38 PM
#5
It seems the 13k CB R23 is underperforming. Expect around 14.5k to 15.5k with minor adjustments. Be sure nobody is achieving 80C on air cooling without the Curve Optimizer. This processor tends to hit close to 90C.
M
mase89
06-23-2022, 09:38 PM #5

It seems the 13k CB R23 is underperforming. Expect around 14.5k to 15.5k with minor adjustments. Be sure nobody is achieving 80C on air cooling without the Curve Optimizer. This processor tends to hit close to 90C.

J
jamine64
Junior Member
3
06-24-2022, 01:04 AM
#6
Using four monitors linked to the GPU might lower your score. The setup with two 1080p, one 100Hz and one 3440p could affect performance differently.
J
jamine64
06-24-2022, 01:04 AM #6

Using four monitors linked to the GPU might lower your score. The setup with two 1080p, one 100Hz and one 3440p could affect performance differently.

E
Easye69
Junior Member
7
06-24-2022, 05:03 AM
#7
Curve optimizer is a method that adjusts the model's parameters along a learning curve to improve performance. It helps scores by finding better settings during training, leading to higher accuracy and more stable results.
E
Easye69
06-24-2022, 05:03 AM #7

Curve optimizer is a method that adjusts the model's parameters along a learning curve to improve performance. It helps scores by finding better settings during training, leading to higher accuracy and more stable results.

L
LU_KAS
Member
147
07-01-2022, 02:33 AM
#8
It involves lowering the voltage for a specific clock speed, which reduces power usage and often allows faster maximum speeds. Many guides are available on YouTube.
L
LU_KAS
07-01-2022, 02:33 AM #8

It involves lowering the voltage for a specific clock speed, which reduces power usage and often allows faster maximum speeds. Many guides are available on YouTube.

X
xXFirewitherXx
Posting Freak
878
07-01-2022, 07:55 AM
#9
Generally, new BIOS updates on most motherboards include this feature in PBO settings. It adjusts the CPU's voltage and frequency curve, allowing higher clock speeds at lower voltages. This boosts performance while reducing heat due to less power consumption. To enable it, you must apply a negative offset—typically around -30 is effective. A lower value may not work if the setting isn't properly configured. It also influences stability; -30 might cause issues for some users, but most CPUs handle -15 to -20 without problems.
X
xXFirewitherXx
07-01-2022, 07:55 AM #9

Generally, new BIOS updates on most motherboards include this feature in PBO settings. It adjusts the CPU's voltage and frequency curve, allowing higher clock speeds at lower voltages. This boosts performance while reducing heat due to less power consumption. To enable it, you must apply a negative offset—typically around -30 is effective. A lower value may not work if the setting isn't properly configured. It also influences stability; -30 might cause issues for some users, but most CPUs handle -15 to -20 without problems.

F
Freedom_Men
Member
211
07-01-2022, 08:38 AM
#10
Consider verifying the complete cooling system installation. The 5800X3D can overheat, but a 360mm water cooling unit should handle it better initially. A decent air cooler might perform even better, so a proper 360mm setup would be ideal. Ensure the CPU contact is correct, the pumps are functioning, the radiator is positioned right, and the fans operate as intended (static pressure vs. airflow focus).
F
Freedom_Men
07-01-2022, 08:38 AM #10

Consider verifying the complete cooling system installation. The 5800X3D can overheat, but a 360mm water cooling unit should handle it better initially. A decent air cooler might perform even better, so a proper 360mm setup would be ideal. Ensure the CPU contact is correct, the pumps are functioning, the radiator is positioned right, and the fans operate as intended (static pressure vs. airflow focus).

Pages (3): 1 2 3 Next