F5F Stay Refreshed Hardware Desktop The 450W PSU isn’t sufficient for your RX 570 processor.

The 450W PSU isn’t sufficient for your RX 570 processor.

The 450W PSU isn’t sufficient for your RX 570 processor.

M
MsSHIP
Member
121
02-02-2017, 06:39 AM
#1
Even undervolt needs to drop to 890mV or less for it not to restart my PC. I’m running a 450W MWh system.
M
MsSHIP
02-02-2017, 06:39 AM #1

Even undervolt needs to drop to 890mV or less for it not to restart my PC. I’m running a 450W MWh system.

Z
Zamorak_boys
Junior Member
43
02-02-2017, 02:50 PM
#2
Here’s a list of the remaining components:
- Component A
- Component B
- Component C
- Component D
Let me know if you need more details!
Z
Zamorak_boys
02-02-2017, 02:50 PM #2

Here’s a list of the remaining components:
- Component A
- Component B
- Component C
- Component D
Let me know if you need more details!

A
adesignarPT
Member
87
02-07-2017, 10:02 AM
#3
i5 6400 processor, 16GB of memory, H110 motherboard slot
A
adesignarPT
02-07-2017, 10:02 AM #3

i5 6400 processor, 16GB of memory, H110 motherboard slot

G
glenroi
Member
164
02-11-2017, 02:25 AM
#4
Hello, the issue seems to be elsewhere. How long have you been using the PSU and what model do you have? Are there any hard drives or a second GPU connected, and have you adjusted any components?
G
glenroi
02-11-2017, 02:25 AM #4

Hello, the issue seems to be elsewhere. How long have you been using the PSU and what model do you have? Are there any hard drives or a second GPU connected, and have you adjusted any components?

P
165
02-11-2017, 03:47 AM
#5
My chipset and CPU are locked, and the GPU isn’t running even at its default speed—let alone overclocking. I’ve turned on XMP in BIOS. I have two HDDs and one SSD, which serves as my boot drive.
P
PedroGamer1313
02-11-2017, 03:47 AM #5

My chipset and CPU are locked, and the GPU isn’t running even at its default speed—let alone overclocking. I’ve turned on XMP in BIOS. I have two HDDs and one SSD, which serves as my boot drive.

R
rosTRak
Junior Member
4
02-16-2017, 08:10 AM
#6
Confirm if the PSU is the issue. Check the manufacturer of your PSU and the age of your graphics card. Also, note when the problems began.
R
rosTRak
02-16-2017, 08:10 AM #6

Confirm if the PSU is the issue. Check the manufacturer of your PSU and the age of your graphics card. Also, note when the problems began.

S
soldierman45
Member
152
02-16-2017, 07:03 PM
#7
I used a Z170 motherboard and it worked well even after light overclocking. It might be related to the 12V power supply from the 6-pin connector on the motherboard.
S
soldierman45
02-16-2017, 07:03 PM #7

I used a Z170 motherboard and it worked well even after light overclocking. It might be related to the 12V power supply from the 6-pin connector on the motherboard.

2
2twins
Junior Member
45
02-20-2017, 08:25 AM
#8
The 6pin connects the CPU while the 24pin identifies the MOBO. It seems the issue might lie with the graphics card or the power supply, not the PSU. I own a GTX 1660 paired with a Ryzen 5 1600AF in a B450 MOBO and a 550w power supply, which is working well. I can even perform some overclocking, suggesting the problem isn't the power supply. Since you mentioned swapping the MOBO as well, that could be the cause too.
2
2twins
02-20-2017, 08:25 AM #8

The 6pin connects the CPU while the 24pin identifies the MOBO. It seems the issue might lie with the graphics card or the power supply, not the PSU. I own a GTX 1660 paired with a Ryzen 5 1600AF in a B450 MOBO and a 550w power supply, which is working well. I can even perform some overclocking, suggesting the problem isn't the power supply. Since you mentioned swapping the MOBO as well, that could be the cause too.

F
Frizayyy
Junior Member
4
02-25-2017, 11:40 AM
#9
none of the cpus feature either 8-pin (dual 4+4) or a single 4-pin, unlike the gpu which uses 6-pin or 8-pin connectors in my setup (i had misunderstood that earlier)
F
Frizayyy
02-25-2017, 11:40 AM #9

none of the cpus feature either 8-pin (dual 4+4) or a single 4-pin, unlike the gpu which uses 6-pin or 8-pin connectors in my setup (i had misunderstood that earlier)