F5F Stay Refreshed Hardware Desktop Temps de CPU un peu élevés.

Temps de CPU un peu élevés.

Temps de CPU un peu élevés.

S
ShadowKing_PvP
Junior Member
31
01-20-2022, 09:10 AM
#1
I see your CPU temperatures are a bit elevated, though not extreme. I’m wondering if there are any adjustments you can make to help lower them slightly. I just started using this system this week, and everything has run smoothly except for this one issue. Below is a screenshot showing the temperatures during a light workload—just basic apps like Edge, GCC, iCUE, Steam, and a few background processes. It might be connected to the AMDEXPO overclock, the Zen 5 architecture, or even the current weather. So far, gaming performance hasn’t been affected much (only tried Terraria, which isn’t very demanding). Any suggestions?
S
ShadowKing_PvP
01-20-2022, 09:10 AM #1

I see your CPU temperatures are a bit elevated, though not extreme. I’m wondering if there are any adjustments you can make to help lower them slightly. I just started using this system this week, and everything has run smoothly except for this one issue. Below is a screenshot showing the temperatures during a light workload—just basic apps like Edge, GCC, iCUE, Steam, and a few background processes. It might be connected to the AMDEXPO overclock, the Zen 5 architecture, or even the current weather. So far, gaming performance hasn’t been affected much (only tried Terraria, which isn’t very demanding). Any suggestions?

G
goatface75
Junior Member
7
01-20-2022, 09:01 PM
#2
Idle or low-load temperatures on AMD CPUs have consistently been elevated since the 3000 series. Temperatures in the low to mid-50s are completely typical. Load temperatures are the ones you should monitor to verify your cooling system is correctly configured and functioning. This is due to the voltage typically ranging between 1.4 and 1.45 volts. They maintain this to prepare the chip for performance demands rather than causing delays before they occur. After applying load, voltages typically drop to appropriate levels while maintaining desired performance and temperatures.
G
goatface75
01-20-2022, 09:01 PM #2

Idle or low-load temperatures on AMD CPUs have consistently been elevated since the 3000 series. Temperatures in the low to mid-50s are completely typical. Load temperatures are the ones you should monitor to verify your cooling system is correctly configured and functioning. This is due to the voltage typically ranging between 1.4 and 1.45 volts. They maintain this to prepare the chip for performance demands rather than causing delays before they occur. After applying load, voltages typically drop to appropriate levels while maintaining desired performance and temperatures.

Y
Yuna77130
Junior Member
17
01-22-2022, 04:26 PM
#3
It's clear you were testing the performance of Control Ultimate at full settings in 1080p. The CPU usage was about half, and the temperatures were within normal ranges.
Y
Yuna77130
01-22-2022, 04:26 PM #3

It's clear you were testing the performance of Control Ultimate at full settings in 1080p. The CPU usage was about half, and the temperatures were within normal ranges.

N
naruto162
Member
199
01-22-2022, 05:26 PM
#4
It looks like everything is fine, really.
N
naruto162
01-22-2022, 05:26 PM #4

It looks like everything is fine, really.