Temperature peaks at 85°C during rendering with Noctua NH U12s

F5F Stay Refreshed Hardware Desktop Temperature peaks at 85°C during rendering with Noctua NH U12s

Pages (2): 1 2 Next

Scriflyy
Member

01-09-2021, 09:45 AM

I built my own PC and I'm unsure if the heatsink is fitting properly or if it's just normal for temperatures to rise during certain tasks. With PBO enabled, I usually see ambient temps between 26-30°C. When I render or run cbr, it stays around 80-85°C, but gaming keeps it lower, about 70°C. My setup includes an Intel i7-12700K (specs vary slightly), UHD 1200, Wi-Fi 6E, and a 6900XT 850W GPU.

Scriflyy

01-09-2021, 09:45 AM #1

SodaBubbles24
Member

145

01-09-2021, 11:35 AM

Completely typical.

SodaBubbles24

01-09-2021, 11:35 AM #2

Completely typical.

Bubblemalien
Member

01-09-2021, 11:49 AM

Track the frequency to assess cooling efficiency. PBO maintains 75-85°C during full load, modifying frequency and voltage to sustain the desired temperature. When frequency appears optimal, cooling performance is confirmed.

Bubblemalien

01-09-2021, 11:49 AM #3

Shikeishuu_
Member

154

01-09-2021, 09:28 PM

Checking the temperatures at that frequency helps ensure comfort. It looks like it should be okay.

Shikeishuu_

01-09-2021, 09:28 PM #4

Checking the temperatures at that frequency helps ensure comfort. It looks like it should be okay.

HolyScythe999
Member

01-10-2021, 01:06 AM

Varies by program. It can reach full capacity, but load levels differ—Cinebench R23 might show 4.5–4.7, while prime95 could be around 3.8–4.0.

HolyScythe999

01-10-2021, 01:06 AM #5

Varies by program. It can reach full capacity, but load levels differ—Cinebench R23 might show 4.5–4.7, while prime95 could be around 3.8–4.0.

shwndnpaul
Junior Member

01-10-2021, 08:56 AM

It's normal for your Ryzen 5 3600 to hit 86°C during Cinebench stress tests with an FX-8370 cooler.

shwndnpaul

01-10-2021, 08:56 AM #6

It's normal for your Ryzen 5 3600 to hit 86°C during Cinebench stress tests with an FX-8370 cooler.

SamPTV
Junior Member

01-11-2021, 05:06 PM

It's on CBR20 and CBR23, but I didn't reach 4.6GHz across all cores in any program.

SamPTV

01-11-2021, 05:06 PM #7

It's on CBR20 and CBR23, but I didn't reach 4.6GHz across all cores in any program.

Aneliz
Junior Member

01-12-2021, 12:59 PM

It seems like the temperature is within an acceptable range for your setup. It depends on the surrounding conditions. No need to be concerned.

Aneliz

01-12-2021, 12:59 PM #8

It seems like the temperature is within an acceptable range for your setup. It depends on the surrounding conditions. No need to be concerned.

PHStussi
Junior Member

01-13-2021, 12:46 PM

I've noticed how PBO limits can affect timing across various tests. It seems unlikely your chip won't hit 4.6 all-core with stock PBO, even on a custom loop. The higher core count and heat from the 5900x likely cause it to run slower than the 5600x.

PHStussi

01-13-2021, 12:46 PM #9

xShaay
Junior Member

01-13-2021, 06:25 PM

#10

I'll adjust this then. Updating the details now. Current conditions are about 26-30°C, occasionally reaching 32°C—definitely a warm place.

xShaay

01-13-2021, 06:25 PM #10

I'll adjust this then. Updating the details now. Current conditions are about 26-30°C, occasionally reaching 32°C—definitely a warm place.

Pages (2): 1 2 Next