F5F Stay Refreshed Hardware Desktop System won't POST ?

System won't POST ?

System won't POST ?

Pages (3): Previous 1 2 3 Next
E
EisTeeKlaus
Senior Member
490
05-05-2021, 06:32 PM
#11
Since there is essentially no debug indicator lighting up at all
E
EisTeeKlaus
05-05-2021, 06:32 PM #11

Since there is essentially no debug indicator lighting up at all

D
Darkslicer11
Member
113
05-05-2021, 06:49 PM
#12
Here is the information from the provided link:

The image shows a view available at the URL https://imgur.com/gallery/sSVbZ3d.
D
Darkslicer11
05-05-2021, 06:49 PM #12

Here is the information from the provided link:

The image shows a view available at the URL https://imgur.com/gallery/sSVbZ3d.

M
MLG_Sheeep
Junior Member
13
05-05-2021, 11:39 PM
#13
Here is what he says
M
MLG_Sheeep
05-05-2021, 11:39 PM #13

Here is what he says

I
iiSweeTzz
Posting Freak
862
05-06-2021, 07:28 AM
#14
Just because parts function on a Z690 board doesn't guarantee stability on another board, especially the B660M D4 model.
I
iiSweeTzz
05-06-2021, 07:28 AM #14

Just because parts function on a Z690 board doesn't guarantee stability on another board, especially the B660M D4 model.

S
sirblobinator
Junior Member
24
05-07-2021, 08:56 AM
#15
it seems like a bios problem might be causing the cpu to struggle, so it should attempt to boot without any issues and see if it can restart. If that fails, the cpu is likely the cause, and you can then add components one by one until it freezes again or you proceed with debugging.
S
sirblobinator
05-07-2021, 08:56 AM #15

it seems like a bios problem might be causing the cpu to struggle, so it should attempt to boot without any issues and see if it can restart. If that fails, the cpu is likely the cause, and you can then add components one by one until it freezes again or you proceed with debugging.

L
legendry1221
Junior Member
20
05-07-2021, 09:18 AM
#16
perhaps the ram wasn't placed properly in slots 1-3 and 2-4, which could be causing freezing or other issues.
L
legendry1221
05-07-2021, 09:18 AM #16

perhaps the ram wasn't placed properly in slots 1-3 and 2-4, which could be causing freezing or other issues.

H
Hanshb3
Member
132
05-07-2021, 11:00 PM
#17
^ --- this is a very good point. Be sure you ask him if he read the manual for proper Ram installation for that board.
H
Hanshb3
05-07-2021, 11:00 PM #17

^ --- this is a very good point. Be sure you ask him if he read the manual for proper Ram installation for that board.

T
TJ_MC_GAMER
Junior Member
35
05-15-2021, 04:56 PM
#18
See the image here and check the link for more details.
T
TJ_MC_GAMER
05-15-2021, 04:56 PM #18

See the image here and check the link for more details.

W
wilger_monster
Member
201
05-15-2021, 06:20 PM
#19
Well here is his pc rn
W
wilger_monster
05-15-2021, 06:20 PM #19

Well here is his pc rn

A
Abanoub
Junior Member
33
05-15-2021, 08:14 PM
#20
In the photo, he has the Ram in slots 2 and 4. I observe a trouble light in that image. Which light is active? Was the picture taken during the POST procedure or after? Without having the manual for that board, I can't confirm if the Ram is correctly slotted. This detail is provided in the manual and may differ between models. You might recall how you installed the Ram? It could help determine if it's correct.
A
Abanoub
05-15-2021, 08:14 PM #20

In the photo, he has the Ram in slots 2 and 4. I observe a trouble light in that image. Which light is active? Was the picture taken during the POST procedure or after? Without having the manual for that board, I can't confirm if the Ram is correctly slotted. This detail is provided in the manual and may differ between models. You might recall how you installed the Ram? It could help determine if it's correct.

Pages (3): Previous 1 2 3 Next