System stops during the visualization process
System stops during the visualization process
I exported a video and suddenly my PC stopped working. I repeated the process, but it kept shutting down. I used Heaven Benchmark to check for graphics card issues—it didn’t show anything, but when I tried Cinebench, the PC also shut down again. I have a Ryzen 5 2600 with the stock RX 2070, 8GB RAM, and one fan in the case. What could be causing this problem?
Have you looked at the temperatures? That fan might be the issue. What’s your situation?
A yeyian costs only $40, making it an affordable option. Would you like additional fans to enhance its performance?
most likely but it depends. whats your temperature? check for CPU and GPU temps when rendering and stuff. overheating can cause the PC to actually turn off. also, i dont know which specific case you have but based on the images that came out, the glass front and almost no hole looks like a restrictive case.
Run a memtest to check your ram. There is a chance that XMP was enabled which on Zen+ and Zen can cause issues, it's best to manually set your timings and its easy to do with Ryzen calculator even if it looks hard its really not 95% of the settings the app tells you to use is in the order of your board's setting too. Pick your rated kits speed in the program and click on "Safe" and take some pictures on your phone(or write them all down like its 1995) and enter in the timings in the bios.
There appears to be an issue with your cooler's installation or configuration. With a standard stock cooler, it shouldn't exceed 80°C.