F5F Stay Refreshed Hardware Desktop System shuts down unexpectedly Device reboots without warning Unstable performance issues

System shuts down unexpectedly Device reboots without warning Unstable performance issues

System shuts down unexpectedly Device reboots without warning Unstable performance issues

C
chaospony
Member
149
11-21-2022, 11:18 PM
#1
Hi, I’m looking for some community support regarding a title-related concern. The issue involves my PC restarting unexpectedly, regardless of load or idle state. Right now I don’t have an external GPU, so the load factor isn’t the problem. I’ve tried using the default BIOS settings, but it still doesn’t work. It appears restarts happen in intervals—every few weeks there’s a pattern. Everything seems normal otherwise: temperatures are fine, RGB LEDs stay steady during reboots. Full specs: Gigabyte Z370 Gaming, 5 i7 8700K, 16 GB DDR4, Corsair RAM (2x), Samsung 970 ECM M.2 x2, Samsung 870QVO Corsair Ax1200i (previously had RTX 3080, planning to upgrade to RTX 4090).
C
chaospony
11-21-2022, 11:18 PM #1

Hi, I’m looking for some community support regarding a title-related concern. The issue involves my PC restarting unexpectedly, regardless of load or idle state. Right now I don’t have an external GPU, so the load factor isn’t the problem. I’ve tried using the default BIOS settings, but it still doesn’t work. It appears restarts happen in intervals—every few weeks there’s a pattern. Everything seems normal otherwise: temperatures are fine, RGB LEDs stay steady during reboots. Full specs: Gigabyte Z370 Gaming, 5 i7 8700K, 16 GB DDR4, Corsair RAM (2x), Samsung 970 ECM M.2 x2, Samsung 870QVO Corsair Ax1200i (previously had RTX 3080, planning to upgrade to RTX 4090).

B
Baffalo3281
Junior Member
9
11-22-2022, 05:27 AM
#2
It doesn't display an instant black screen on restart, but it may resemble a window shutting down. Given its age, a thorough reset with proper discharge could help.
B
Baffalo3281
11-22-2022, 05:27 AM #2

It doesn't display an instant black screen on restart, but it may resemble a window shutting down. Given its age, a thorough reset with proper discharge could help.

M
mat_fram
Posting Freak
776
11-26-2022, 10:42 PM
#3
Screen goes instantly black with no visual output. Display is completely disabled. Both CPU and case fans are powered down. Only the motherboard's RGB LED remains visible.
M
mat_fram
11-26-2022, 10:42 PM #3

Screen goes instantly black with no visual output. Display is completely disabled. Both CPU and case fans are powered down. Only the motherboard's RGB LED remains visible.

D
Dizy73
Junior Member
14
11-29-2022, 04:07 PM
#4
However, it resumes immediately and proceeds to the windows?
D
Dizy73
11-29-2022, 04:07 PM #4

However, it resumes immediately and proceeds to the windows?

R
ryder873
Member
66
11-29-2022, 05:33 PM
#5
Yes
R
ryder873
11-29-2022, 05:33 PM #5

Yes

E
EnderMaster008
Member
62
11-29-2022, 07:11 PM
#6
In that scenario the board really benefits from a fresh take out module with heatsinks and CMOS battery. Press the power button and clear the CMOS for two minutes, then rinse in water making sure it’s fully submerged. Submerge it in a bucket of water for about an hour without using any detergent. Let it sit for a day or two depending on the weather. You might also try a dishwasher, but since you don’t have one, a manual soak works just as well. I’ve faced similar problems with my P6T Deluxe v2 and Z77 Extreme4—my Z77 didn’t work, but a simple soak in water later solved it. My P6T Deluxe v2 is still fine now.
E
EnderMaster008
11-29-2022, 07:11 PM #6

In that scenario the board really benefits from a fresh take out module with heatsinks and CMOS battery. Press the power button and clear the CMOS for two minutes, then rinse in water making sure it’s fully submerged. Submerge it in a bucket of water for about an hour without using any detergent. Let it sit for a day or two depending on the weather. You might also try a dishwasher, but since you don’t have one, a manual soak works just as well. I’ve faced similar problems with my P6T Deluxe v2 and Z77 Extreme4—my Z77 didn’t work, but a simple soak in water later solved it. My P6T Deluxe v2 is still fine now.

S
ScopeZMLG
Member
50
12-02-2022, 10:31 PM
#7
Let's focus on identifying the responsible party.
S
ScopeZMLG
12-02-2022, 10:31 PM #7

Let's focus on identifying the responsible party.

P
poulsonater101
Junior Member
33
12-03-2022, 12:23 AM
#8
I’m taking things seriously. I’ve resolved several boards with this unexpected shutdown problem using the same approach, and only one didn’t work—this stubborn H61 in China.
P
poulsonater101
12-03-2022, 12:23 AM #8

I’m taking things seriously. I’ve resolved several boards with this unexpected shutdown problem using the same approach, and only one didn’t work—this stubborn H61 in China.

C
camntroy
Member
132
12-14-2022, 10:48 AM
#9
Based on what you shared, switching the motherboard might resolve the issue. Your soak should function properly afterward.
C
camntroy
12-14-2022, 10:48 AM #9

Based on what you shared, switching the motherboard might resolve the issue. Your soak should function properly afterward.

T
thedoggamer987
Member
53
12-16-2022, 08:47 AM
#10
there’s absolutely no danger of getting hurt by dunking in water once the board is fully drained. You’ve already done this many times, and most boards with pesky shutdown glitches have been fixed. If you’re thinking about spending money on an outdated setup, go ahead—but consider upgrading to a used b3/4/550 or a 5600(x)/5800x if you plan to swap boards. Probably only a few fools will buy an 8700k for $100–150.
T
thedoggamer987
12-16-2022, 08:47 AM #10

there’s absolutely no danger of getting hurt by dunking in water once the board is fully drained. You’ve already done this many times, and most boards with pesky shutdown glitches have been fixed. If you’re thinking about spending money on an outdated setup, go ahead—but consider upgrading to a used b3/4/550 or a 5600(x)/5800x if you plan to swap boards. Probably only a few fools will buy an 8700k for $100–150.