F5F Stay Refreshed Power Users Networks System shuts down during network connection while resting.

System shuts down during network connection while resting.

System shuts down during network connection while resting.

C
CocaCola15
Senior Member
603
02-19-2026, 10:12 PM
#1
I'm trying to configure WoL on my PC so I can connect from university for intensive tasks. My laptop is too slow for TeamViewer, but I want to use it efficiently and save battery. The router setup looks good—WoL and network adapter are configured properly, and the BIOS seems correct. I also checked Depicus's WoL Monitor and used it to send packets over the internet. The only issue is that my PC doesn't receive magic packets when it's off or asleep. I reviewed the router logs and noticed my PC's ARP flag is incomplete, which might prevent the router from locating it. When I ping my static IP from the router, nothing appears. Could there be a setting I'm missing that stops the PC from responding to the router while it's powered down or idle? Thanks for your help!
C
CocaCola15
02-19-2026, 10:12 PM #1

I'm trying to configure WoL on my PC so I can connect from university for intensive tasks. My laptop is too slow for TeamViewer, but I want to use it efficiently and save battery. The router setup looks good—WoL and network adapter are configured properly, and the BIOS seems correct. I also checked Depicus's WoL Monitor and used it to send packets over the internet. The only issue is that my PC doesn't receive magic packets when it's off or asleep. I reviewed the router logs and noticed my PC's ARP flag is incomplete, which might prevent the router from locating it. When I ping my static IP from the router, nothing appears. Could there be a setting I'm missing that stops the PC from responding to the router while it's powered down or idle? Thanks for your help!

K
Killerman1834
Posting Freak
885
02-20-2026, 03:06 AM
#2
The system relies on MAC addresses instead of IPs during sleep. Depicus sends packets using local MAC information.
K
Killerman1834
02-20-2026, 03:06 AM #2

The system relies on MAC addresses instead of IPs during sleep. Depicus sends packets using local MAC information.

H
hd2d3d
Member
214
02-22-2026, 01:50 AM
#3
I believe Depicus transmits a magical data packet to my router, and I configured my PC's IP as a DMZ host. This was done since I couldn't locate any WoL options on the router interface. It's a budget modem/router provided by my ISP.
H
hd2d3d
02-22-2026, 01:50 AM #3

I believe Depicus transmits a magical data packet to my router, and I configured my PC's IP as a DMZ host. This was done since I couldn't locate any WoL options on the router interface. It's a budget modem/router provided by my ISP.

M
71
02-22-2026, 09:27 PM
#4
Send the Magic Packet to your subnet's broadcast address. Avoid targeting your computer's IP. Stay cautious. Some routers don't support directed broadcasts.
M
miningmario101
02-22-2026, 09:27 PM #4

Send the Magic Packet to your subnet's broadcast address. Avoid targeting your computer's IP. Stay cautious. Some routers don't support directed broadcasts.

L
Luiisss
Member
164
02-22-2026, 10:40 PM
#5
You increase the risks for your PC by putting it in the DMZ. The safest method is using an always-on device (like a server or NAS) to serve as a local WOL relay. If your router doesn’t support WOL, this approach likely won’t function as intended.
L
Luiisss
02-22-2026, 10:40 PM #5

You increase the risks for your PC by putting it in the DMZ. The safest method is using an always-on device (like a server or NAS) to serve as a local WOL relay. If your router doesn’t support WOL, this approach likely won’t function as intended.

M
miknes123
Senior Member
646
02-22-2026, 10:50 PM
#6
I understand the risks you're facing with your PC, but it's the sole device in your home. While saving power is important, keeping it always active undermines that goal. Are there alternative solutions so you can shut it down when not needed yet stay prepared to restart whenever?
M
miknes123
02-22-2026, 10:50 PM #6

I understand the risks you're facing with your PC, but it's the sole device in your home. While saving power is important, keeping it always active undermines that goal. Are there alternative solutions so you can shut it down when not needed yet stay prepared to restart whenever?

C
crazyborg
Member
122
02-25-2026, 02:38 AM
#7
Accepted, though unless your LAN supports a method for transmitting those Magic Packets locally, it won't function. Correct. Using WOL with a reliable relay works well. A simple RaspberryPi can be programmed to issue the WOL command locally, and you can reach it remotely via SSH or a remote desktop tool.
C
crazyborg
02-25-2026, 02:38 AM #7

Accepted, though unless your LAN supports a method for transmitting those Magic Packets locally, it won't function. Correct. Using WOL with a reliable relay works well. A simple RaspberryPi can be programmed to issue the WOL command locally, and you can reach it remotely via SSH or a remote desktop tool.

R
ReborntoKill
Posting Freak
821
02-26-2026, 05:27 PM
#8
Checked if Wake-on-LAN was activated in the system settings or network adapter configuration.
R
ReborntoKill
02-26-2026, 05:27 PM #8

Checked if Wake-on-LAN was activated in the system settings or network adapter configuration.