F5F Stay Refreshed Hardware Desktop System Service Exception Constant Related To Ntoskrnl.exe

System Service Exception Constant Related To Ntoskrnl.exe

System Service Exception Constant Related To Ntoskrnl.exe

Pages (2): 1 2 Next
C
coolman90
Junior Member
9
10-29-2021, 04:45 PM
#1
I've been experiencing these bluescreens for nearly two years now. Just a couple of weeks ago I reset my computer, but it still crashes. Recently, I swapped out my GPU in an attempt to resolve the problem—though the GPU was clearly struggling—I still face the same issue. It seems the RAM might be the real culprit at this point, and I'm trying to avoid replacing the memory if possible.

Here are the latest DMP files from after the GPU replacement:
https://drive.google.com/file/d/1i6e1yCH...sp=sharing
https://drive.google.com/file/d/1zDA2qkU...sp=sharing

Specifications:
- Ryzen 7 3700X
- RX 3060 Ti
- 8x4 (32GB, 4 sticks) Corsair Vengeance DDR4 3200MHz
- ASRock B550M Pro 4
- Windows 11

The replacement GPU is still in use, but the problem remains unchanged. It appears to be a matter of trying different solutions without success.
C
coolman90
10-29-2021, 04:45 PM #1

I've been experiencing these bluescreens for nearly two years now. Just a couple of weeks ago I reset my computer, but it still crashes. Recently, I swapped out my GPU in an attempt to resolve the problem—though the GPU was clearly struggling—I still face the same issue. It seems the RAM might be the real culprit at this point, and I'm trying to avoid replacing the memory if possible.

Here are the latest DMP files from after the GPU replacement:
https://drive.google.com/file/d/1i6e1yCH...sp=sharing
https://drive.google.com/file/d/1zDA2qkU...sp=sharing

Specifications:
- Ryzen 7 3700X
- RX 3060 Ti
- 8x4 (32GB, 4 sticks) Corsair Vengeance DDR4 3200MHz
- ASRock B550M Pro 4
- Windows 11

The replacement GPU is still in use, but the problem remains unchanged. It appears to be a matter of trying different solutions without success.

H
Hidekih
Posting Freak
849
11-13-2021, 12:15 AM
#2
Did you verify the memory using a tool such as memtest?
Are you referring to two pairs or a single group of four identical sticks?
H
Hidekih
11-13-2021, 12:15 AM #2

Did you verify the memory using a tool such as memtest?
Are you referring to two pairs or a single group of four identical sticks?

N
Necron65
Member
205
11-13-2021, 01:43 AM
#3
I did memtest earlier when I began experiencing those noises, and everything looked good. I think another test would be wise.
N
Necron65
11-13-2021, 01:43 AM #3

I did memtest earlier when I began experiencing those noises, and everything looked good. I think another test would be wise.

D
Directioner158
Junior Member
21
11-13-2021, 05:53 AM
#4
How does the system respond when just one pair is connected? Also, does operating at the standard 2133 setting without XMP or DOCP affect performance? Is your motherboard's BIOS completely current?
D
Directioner158
11-13-2021, 05:53 AM #4

How does the system respond when just one pair is connected? Also, does operating at the standard 2133 setting without XMP or DOCP affect performance? Is your motherboard's BIOS completely current?

P
PhantomRazer
Member
186
11-13-2021, 08:29 PM
#5
i haven't checked with just one pair, but the second one is significantly newer since i upgraded from 16 to 32. i'm not completely sure, but it seems this issue only became noticeable after installing the second pair. i haven't tested without xmp either, but i think i recently enabled it and it's been causing problems for a while now. bios is up to date as of about a couple of months ago.
P
PhantomRazer
11-13-2021, 08:29 PM #5

i haven't checked with just one pair, but the second one is significantly newer since i upgraded from 16 to 32. i'm not completely sure, but it seems this issue only became noticeable after installing the second pair. i haven't tested without xmp either, but i think i recently enabled it and it's been causing problems for a while now. bios is up to date as of about a couple of months ago.

L
LpLuks
Member
141
11-14-2021, 01:08 AM
#6
Combining memory in this way can lead to problems. Even though pairs share the same model name, they aren't necessarily the same. At least, place one pair in slots 1 and 3, and another in slots 2 and 4. Turn off XMP. Check if the system stabilizes.
L
LpLuks
11-14-2021, 01:08 AM #6

Combining memory in this way can lead to problems. Even though pairs share the same model name, they aren't necessarily the same. At least, place one pair in slots 1 and 3, and another in slots 2 and 4. Turn off XMP. Check if the system stabilizes.

R
RCVincnet
Member
50
11-15-2021, 04:41 PM
#7
I'll test without XMP, though it might take a while since there aren't really solid ways to recreate the crashes. I'm also going to try DDU because I replaced the GPU before. Also, the original pair is in 1 and 3, and the second is in 2 and 4—either way, they're staggered.
R
RCVincnet
11-15-2021, 04:41 PM #7

I'll test without XMP, though it might take a while since there aren't really solid ways to recreate the crashes. I'm also going to try DDU because I replaced the GPU before. Also, the original pair is in 1 and 3, and the second is in 2 and 4—either way, they're staggered.

T
TheMCCowGirl
Junior Member
8
11-15-2021, 11:31 PM
#8
Got it. No rush. We're ready to assist whenever you need.
T
TheMCCowGirl
11-15-2021, 11:31 PM #8

Got it. No rush. We're ready to assist whenever you need.

D
DANNYB234
Junior Member
15
11-16-2021, 12:13 AM
#9
I duded my drivers and kept running RAM at 2133 since my last post. Although the crashes are less frequent now, they still happen and haven’t generated any DMP files for me to upload. There are also several hardware errors in the reliability monitor that I somehow overlooked, such as WERinternalMetadata.xml, memory.csv, sysdata.xml, sysinfo.txt, and WERinternalRequest.xml.

EDIT:
I should also note that after running the DDU, the crashes have ceased to report anything about NVIDIA.
D
DANNYB234
11-16-2021, 12:13 AM #9

I duded my drivers and kept running RAM at 2133 since my last post. Although the crashes are less frequent now, they still happen and haven’t generated any DMP files for me to upload. There are also several hardware errors in the reliability monitor that I somehow overlooked, such as WERinternalMetadata.xml, memory.csv, sysdata.xml, sysinfo.txt, and WERinternalRequest.xml.

EDIT:
I should also note that after running the DDU, the crashes have ceased to report anything about NVIDIA.

L
lilycotterill
Senior Member
656
11-16-2021, 07:25 AM
#10
most recent crashes weren't just bluescreens, my displays simply went dark yet I could still hear everything clearly.
L
lilycotterill
11-16-2021, 07:25 AM #10

most recent crashes weren't just bluescreens, my displays simply went dark yet I could still hear everything clearly.

Pages (2): 1 2 Next