System reports significantly reduced DRAM capacity compared to what is displayed.
System reports significantly reduced DRAM capacity compared to what is displayed.
I just bought some GSkill DDR4 Memory (2x8GB, total 16GB) to combine with my existing 16GB, giving me 32GB overall. The product was advertised as 3200 MHz, but in my task manager it shows 933 MHz and in the BIOS it says about twice that—around 1800 MHz. That’s more than 1000 MHz slower than expected, even though I’ve set my XMP profile to the 3200 MHz RAM sticks. Help would be appreciated <3
Default settings should align with 2133 or 1066mhz for double data rate. With two different kits, running at 3200mhz together isn't likely. Consider a lower frequency such as 2667mhz in BIOS and adjust RAM voltage to 1.35v.
Your memory settings might not match what you expect. It should be operating at 2133 for DDR4, not the higher speed. Make sure your motherboard supports it and that BIOS is up to date. You should stick with 3000 unless you really need something faster. Overclocking RAM is feasible but requires significant effort—only consider it if necessary.
I’m not sure about your BIOS setup, but you can try adjusting the XMP profile to 3000 Kit with a voltage of 1.35V. For updating your BIOS, refer to your device’s manual or the manufacturer’s website for instructions. Let me know if you need further help!
Check if the XMP profile matches your slower component's actual speed. Confirm whether your RAM was already operating at 3000 MHz prior to installing the new RAM through XMP.