F5F Stay Refreshed Hardware Desktop System power-off and restart occurred smoothly, recorded as event ID 41 in the event logger.

System power-off and restart occurred smoothly, recorded as event ID 41 in the event logger.

System power-off and restart occurred smoothly, recorded as event ID 41 in the event logger.

L
LeoRaimana
Junior Member
44
10-19-2021, 07:19 AM
#1
Hey, I've faced this problem for more than six months now. My computer keeps restarting unexpectedly while I'm playing games. It doesn't happen unless I'm using any kind of intensive tasks. Sometimes it works fine, other times I experience frequent crashes. The same error code appears in the Windows Event Log—Event ID 41. I've also noticed visual glitches on a couple of occasions, only when the crashes seem to line up. I ran memtesting and the system passed. I replaced my NVMe SSD and cleared all drives, but nothing changed. I applied new cooling paste, rechecked connections, and even reinstalled Windows 10 before switching to Windows 11. The issue persists in both versions. I've updated the BIOS and drivers after each incident, but it seems the firmware might be outdated. I'm unsure if the problem lies with drivers, a faulty GPU, or power issues. Any advice would be greatly appreciated.
L
LeoRaimana
10-19-2021, 07:19 AM #1

Hey, I've faced this problem for more than six months now. My computer keeps restarting unexpectedly while I'm playing games. It doesn't happen unless I'm using any kind of intensive tasks. Sometimes it works fine, other times I experience frequent crashes. The same error code appears in the Windows Event Log—Event ID 41. I've also noticed visual glitches on a couple of occasions, only when the crashes seem to line up. I ran memtesting and the system passed. I replaced my NVMe SSD and cleared all drives, but nothing changed. I applied new cooling paste, rechecked connections, and even reinstalled Windows 10 before switching to Windows 11. The issue persists in both versions. I've updated the BIOS and drivers after each incident, but it seems the firmware might be outdated. I'm unsure if the problem lies with drivers, a faulty GPU, or power issues. Any advice would be greatly appreciated.

S
sst04
Member
208
10-19-2021, 07:51 AM
#2
Checking if voltage spikes reach the required level to trigger OCP on the PSU
S
sst04
10-19-2021, 07:51 AM #2

Checking if voltage spikes reach the required level to trigger OCP on the PSU

X
xXSuperNovaXx
Posting Freak
811
10-19-2021, 08:08 PM
#3
I've been considering this too. Online wattage calculators suggest my setup stays under 450W when running. It might be wise to use a wattmeter to verify the actual consumption.
X
xXSuperNovaXx
10-19-2021, 08:08 PM #3

I've been considering this too. Online wattage calculators suggest my setup stays under 450W when running. It might be wise to use a wattmeter to verify the actual consumption.

S
strongboyman
Junior Member
12
10-19-2021, 08:37 PM
#4
The concern lies in sudden power surges rather than consistent output, which poses a greater challenge since detecting these fluctuations is difficult.
S
strongboyman
10-19-2021, 08:37 PM #4

The concern lies in sudden power surges rather than consistent output, which poses a greater challenge since detecting these fluctuations is difficult.

J
JustRhune
Member
199
10-22-2021, 06:31 PM
#5
I've taken out the extra cords and added a fresh 1000W BeQuiet Dark Power 13 to the PC, but it keeps crashing. Got any suggestions? I'm running out of options.
J
JustRhune
10-22-2021, 06:31 PM #5

I've taken out the extra cords and added a fresh 1000W BeQuiet Dark Power 13 to the PC, but it keeps crashing. Got any suggestions? I'm running out of options.