System freezes during rendering tasks on Overclocked 1700X while using Sony Vegas
System freezes during rendering tasks on Overclocked 1700X while using Sony Vegas
Not too long ago I posted a discussion similar to this regarding the same problem with an AMD FX CPU. Generally, whenever I push my CPU to higher speeds (which I believe is stable based on a guide I followed), everything functions properly. However, when I start rendering videos in Sony Vegas, my computer suddenly stops after a short period. I suspect the issue is linked to overclocking since it worked fine at lower speeds. I also reduced the number of rendering threads from 16 to 4, which extended the time before crashing, but the problem persisted. My CPU temperatures during rendering vary between 70.0°C and about 90.2°C, often staying around 86.0°C. I’m trying to fix this without affecting my overclock settings. If needed, I can share my system details and voltages. Thanks.
verify your motherboard uefi configurations for bios that could have been affected by a 92 c on load.
Mikeandike shares his experience with the specs, noting the OC isn't fully stable. He suggests lowering the overclock by 100mhz or slightly increasing the voltage and testing again. He also mentions trying a voltage of 1.4V and points out the motherboard settings.
scout_03 :
review your motherboard uefi configurations for bios settings, possibly due to high performance at 92 c on load. That's what I considered. I also thought about reducing the voltage to 1.35V, as some articles mentioned.
what kind of ram exists that allows boosting performance without increasing voltage on the cpu or memory?
Mikeandike:
Consider starting with stock clocks to confirm it's solely your CPU's performance. Rendering before overclocking worked well. Should I focus on overclocking the RAM first or the CPU separately?