F5F Stay Refreshed Hardware Desktop System freezes after ending a game and fails to start without resetting CMOS settings.

System freezes after ending a game and fails to start without resetting CMOS settings.

System freezes after ending a game and fails to start without resetting CMOS settings.

Pages (2): 1 2 Next
I
ImS4G
Member
66
04-12-2023, 02:32 PM
#1
I just put the new AIO cooler on my girlfriend’s CPU. At first I tested it in the kitchen because there wasn’t much space on her desk. It worked perfectly then. After putting the panels back in, I took it back to her desk. Initially it wouldn’t power on at all. All the LEDs would flash and the fans would spin for about a second before cutting off power again. Eventually I decided to reset the CMOS after re-seating everything, and it turned back on. Once I logged in, I tried launching a game so I could check the temperatures. Everything seemed normal until I closed the game and it froze. I was able to move program windows around but couldn’t interact with any programs or open Task Manager. So I manually shut down the PC, and the same problem occurred—lights would flicker and stop again until I cleared the CMOS. It won’t boot unless I do that (only after a crash). I’ve tried many things so far: updating DDU, installing a clean GPU driver, running an SFC scan and repair, flashing the latest BIOS, re-seating components again, inspecting CPU pins for debris or damage, cleaning the socket with IPA, and even running memtest. I’m trying to remember what I did, but it’s getting harder. I’m really frustrated and hope someone can help me figure this out. I’ll share my specs in the replies too.
I
ImS4G
04-12-2023, 02:32 PM #1

I just put the new AIO cooler on my girlfriend’s CPU. At first I tested it in the kitchen because there wasn’t much space on her desk. It worked perfectly then. After putting the panels back in, I took it back to her desk. Initially it wouldn’t power on at all. All the LEDs would flash and the fans would spin for about a second before cutting off power again. Eventually I decided to reset the CMOS after re-seating everything, and it turned back on. Once I logged in, I tried launching a game so I could check the temperatures. Everything seemed normal until I closed the game and it froze. I was able to move program windows around but couldn’t interact with any programs or open Task Manager. So I manually shut down the PC, and the same problem occurred—lights would flicker and stop again until I cleared the CMOS. It won’t boot unless I do that (only after a crash). I’ve tried many things so far: updating DDU, installing a clean GPU driver, running an SFC scan and repair, flashing the latest BIOS, re-seating components again, inspecting CPU pins for debris or damage, cleaning the socket with IPA, and even running memtest. I’m trying to remember what I did, but it’s getting harder. I’m really frustrated and hope someone can help me figure this out. I’ll share my specs in the replies too.

N
nombel
Junior Member
18
04-14-2023, 03:50 AM
#2
• Ryzen 5 3500X
• MSI Tomahawk B450 MAX II
• 2x 16GB Corsair Vengeance RGB PRO 3200MHz
• Nvidia RTX3060
• 650W Corsair power supply (exact model omitted)
• Boot from WD NVME SSD; Memtest passed successfully
Edited November 1, 2022 by TamasFried
N
nombel
04-14-2023, 03:50 AM #2

• Ryzen 5 3500X
• MSI Tomahawk B450 MAX II
• 2x 16GB Corsair Vengeance RGB PRO 3200MHz
• Nvidia RTX3060
• 650W Corsair power supply (exact model omitted)
• Boot from WD NVME SSD; Memtest passed successfully
Edited November 1, 2022 by TamasFried

B
bigcow666
Member
73
04-15-2023, 10:06 AM
#3
Ryzen and compatible boards often face RAM stability problems when the board manufacturer's QVL isn't adhered to. It's recommended to verify your RAM SKU with MSI's QVL for your exact board type. If it doesn't appear, this could indicate a RAM stability concern.
B
bigcow666
04-15-2023, 10:06 AM #3

Ryzen and compatible boards often face RAM stability problems when the board manufacturer's QVL isn't adhered to. It's recommended to verify your RAM SKU with MSI's QVL for your exact board type. If it doesn't appear, this could indicate a RAM stability concern.

S
Sman4231
Member
113
04-18-2023, 02:02 AM
#4
Thanks, I'll take a look. Just a note that the PC has functioned well with that RAM setup for the past six months or so.
S
Sman4231
04-18-2023, 02:02 AM #4

Thanks, I'll take a look. Just a note that the PC has functioned well with that RAM setup for the past six months or so.

X
XxJamstarxX
Junior Member
9
04-18-2023, 03:10 AM
#5
It took some time for the new setup to behave properly... then it caused a lot of frustration for a few months. The replacement RAM matched the original in terms of density, storage, speed, and voltage. However, not all boards and RAMs work well together.
X
XxJamstarxX
04-18-2023, 03:10 AM #5

It took some time for the new setup to behave properly... then it caused a lot of frustration for a few months. The replacement RAM matched the original in terms of density, storage, speed, and voltage. However, not all boards and RAMs work well together.

D
168
04-23-2023, 08:50 AM
#6
That's quite unusual! I might consider exchanging her RAM with mine since we share the same amount. Appreciate your prompt responses—I'll give it a try.
D
Dolphinpokemon
04-23-2023, 08:50 AM #6

That's quite unusual! I might consider exchanging her RAM with mine since we share the same amount. Appreciate your prompt responses—I'll give it a try.

I
ImWinky
Member
151
04-23-2023, 11:16 PM
#7
Changing the RAM to an identical set won’t cause another problem unless it’s the same model.
I
ImWinky
04-23-2023, 11:16 PM #7

Changing the RAM to an identical set won’t cause another problem unless it’s the same model.

C
CristoferOM2
Member
103
04-25-2023, 12:43 PM
#8
They're the same speed and capacity, just not identical kits. Got it!
C
CristoferOM2
04-25-2023, 12:43 PM #8

They're the same speed and capacity, just not identical kits. Got it!

N
niuhayan
Member
165
05-09-2023, 06:28 PM
#9
It’s possible the problem might appear again if it isn’t already recorded. This could affect how often and where issues show up. I noticed two separate problems with the same setup on different boards using different processors. That helped me understand the situation.
N
niuhayan
05-09-2023, 06:28 PM #9

It’s possible the problem might appear again if it isn’t already recorded. This could affect how often and where issues show up. I noticed two separate problems with the same setup on different boards using different processors. That helped me understand the situation.

E
Error_Sans55
Member
245
05-10-2023, 03:15 AM
#10
Vengeance LPX 3200 and Ryzen show some major issues. I’ve seen this firsthand. Frequent strange actions and crashes are common.
E
Error_Sans55
05-10-2023, 03:15 AM #10

Vengeance LPX 3200 and Ryzen show some major issues. I’ve seen this firsthand. Frequent strange actions and crashes are common.

Pages (2): 1 2 Next