F5F Stay Refreshed Hardware Desktop System failures occur during PC shutdowns when RAM operates at its advertised rate.

System failures occur during PC shutdowns when RAM operates at its advertised rate.

System failures occur during PC shutdowns when RAM operates at its advertised rate.

D
DexoX_
Junior Member
Find
37
06-05-2018, 01:44 PM
#1
I've encountered a problem where my computer crashes to the blue screen after restarting when I adjust the RAM speed in BIOS to its advertised 3200MHz. The system fails if the speed exceeds 2400MHz. I'm uncertain whether the issue lies with the RAM timings or insufficient voltage, and I've tested running at 1.35V without resolving the problem. I'm unsure if I made a mistake or if my hardware is faulty, but I would greatly appreciate advice from someone more experienced. I use a Ryzen 5 2600 with an Asus B450-F featuring 2x8GB of Team Group T-Force Night Hawk RGB, rated at 3200MHz.
Reply
Reply
D
DexoX_
06-05-2018, 01:44 PM #1

I've encountered a problem where my computer crashes to the blue screen after restarting when I adjust the RAM speed in BIOS to its advertised 3200MHz. The system fails if the speed exceeds 2400MHz. I'm uncertain whether the issue lies with the RAM timings or insufficient voltage, and I've tested running at 1.35V without resolving the problem. I'm unsure if I made a mistake or if my hardware is faulty, but I would greatly appreciate advice from someone more experienced. I use a Ryzen 5 2600 with an Asus B450-F featuring 2x8GB of Team Group T-Force Night Hawk RGB, rated at 3200MHz.

Reply
Reply
X
XxGrenidierXx
Posting Freak
Find
813
06-19-2018, 06:44 AM
#2
Confirm placement in slots 2 and 4, then adjust SOC to 1.1/.15 and DRAM to 1.35. Proceed with 2933 using xmp/docp, and if stable, move to 3000 with those settings.
Reply
Reply
X
XxGrenidierXx
06-19-2018, 06:44 AM #2

Confirm placement in slots 2 and 4, then adjust SOC to 1.1/.15 and DRAM to 1.35. Proceed with 2933 using xmp/docp, and if stable, move to 3000 with those settings.

Reply
Reply