F5F Stay Refreshed Hardware Desktop System failure detected. Please check power connections and restart the device.

System failure detected. Please check power connections and restart the device.

System failure detected. Please check power connections and restart the device.

R
roysegerstexel
Junior Member
3
10-14-2017, 04:07 AM
#1
Hello everyone, welcome from Brazil. I’m facing a tricky issue I need your help with. Here’s what I’ve noticed: (1) My system uses an Asus Strix H470i with Core i3 10100f, 16GB RAM, Hyper X Pretador, GTX 1650 low profile, NVMe A2000 1TB, and a Flex PSU Delta DPS500. (2) When I power on the Delta PSU, it makes a clicking sound, but the CPU fan stops spinning and only the red LED lights up. This happens even with another setup (Asus TUF, i7 9700, GTX 1650, 8-pin PSU). (3) Another Flex PSU works fine without any noise, but I bought a generic one and it still powers on after removing the battery—only starts when the battery is out. (4) With any PSU, my computer runs perfectly, even using a DC-DC Pico PSU + power brick. (5) I’ve tested the PSU voltage and motherboard connections; everything seems normal. (6) Oddly enough, during troubleshooting, I switched to a specific Brazilian brand PSU and after replacing it with a Delta model, the PC turned on, worked for a week, then stopped. It played a strange ticking sound like Tec Tec Tec. I’m stuck and don’t have any more ideas. Any suggestions? Thanks in advance!
R
roysegerstexel
10-14-2017, 04:07 AM #1

Hello everyone, welcome from Brazil. I’m facing a tricky issue I need your help with. Here’s what I’ve noticed: (1) My system uses an Asus Strix H470i with Core i3 10100f, 16GB RAM, Hyper X Pretador, GTX 1650 low profile, NVMe A2000 1TB, and a Flex PSU Delta DPS500. (2) When I power on the Delta PSU, it makes a clicking sound, but the CPU fan stops spinning and only the red LED lights up. This happens even with another setup (Asus TUF, i7 9700, GTX 1650, 8-pin PSU). (3) Another Flex PSU works fine without any noise, but I bought a generic one and it still powers on after removing the battery—only starts when the battery is out. (4) With any PSU, my computer runs perfectly, even using a DC-DC Pico PSU + power brick. (5) I’ve tested the PSU voltage and motherboard connections; everything seems normal. (6) Oddly enough, during troubleshooting, I switched to a specific Brazilian brand PSU and after replacing it with a Delta model, the PC turned on, worked for a week, then stopped. It played a strange ticking sound like Tec Tec Tec. I’m stuck and don’t have any more ideas. Any suggestions? Thanks in advance!

I
ixcraftixksa
Junior Member
40
10-14-2017, 04:07 AM
#2
Video ID: Video 2023-02-11-WA0002
File Name: VID-20230211-WA0002.mp4
I
ixcraftixksa
10-14-2017, 04:07 AM #2

Video ID: Video 2023-02-11-WA0002
File Name: VID-20230211-WA0002.mp4

S
Super_AapjexD
Posting Freak
766
10-14-2017, 04:07 AM
#3
Initial thought points to an issue with overcurrent protection. Possibly a faulty BIOS could also be the cause.
S
Super_AapjexD
10-14-2017, 04:07 AM #3

Initial thought points to an issue with overcurrent protection. Possibly a faulty BIOS could also be the cause.

_
_Rex_Stone_
Junior Member
26
10-14-2017, 04:07 AM
#4
I'll attempt to reduce the BIOS settings and check the outcome. Appreciate your suggestion.
_
_Rex_Stone_
10-14-2017, 04:07 AM #4

I'll attempt to reduce the BIOS settings and check the outcome. Appreciate your suggestion.

0
05matthew05
Member
62
10-14-2017, 04:07 AM
#5
It seems the BIOS downgrade and upgrade didn't succeed, but the issue remains unchanged. I plan to attempt a lower BIOS version and observe the outcome. Appreciate your feedback.
0
05matthew05
10-14-2017, 04:07 AM #5

It seems the BIOS downgrade and upgrade didn't succeed, but the issue remains unchanged. I plan to attempt a lower BIOS version and observe the outcome. Appreciate your feedback.

M
MessiFan4evr
Member
119
10-14-2017, 04:07 AM
#6
Site shows 10100F works with BIOS version 0405. Below is a list of additional supported devices from the site. Unlikely, but possible the board rejects your NVME, RAM or similar. @tcinfo NOTED: Another chance is mixed connectors—4-pin and 8-pin—one might be missing. ADDED: Found some videos about PSU testing... Edited Feb 21, 2023 by An0maly_76 Updated with more details
M
MessiFan4evr
10-14-2017, 04:07 AM #6

Site shows 10100F works with BIOS version 0405. Below is a list of additional supported devices from the site. Unlikely, but possible the board rejects your NVME, RAM or similar. @tcinfo NOTED: Another chance is mixed connectors—4-pin and 8-pin—one might be missing. ADDED: Found some videos about PSU testing... Edited Feb 21, 2023 by An0maly_76 Updated with more details

L
Love_Trush
Member
51
10-14-2017, 04:07 AM
#7
I've inspected cables and connections; everything seems fine. The PSU functioned properly for roughly two weeks before failing. It appears the issue is hardware-related. I also tested running just the CPU and RAM outside the case, but the same problem occurred. If a fix isn't possible, I might need to replace the motherboard and upgrade the CPU for my setup.
L
Love_Trush
10-14-2017, 04:07 AM #7

I've inspected cables and connections; everything seems fine. The PSU functioned properly for roughly two weeks before failing. It appears the issue is hardware-related. I also tested running just the CPU and RAM outside the case, but the same problem occurred. If a fix isn't possible, I might need to replace the motherboard and upgrade the CPU for my setup.

9
99Zach99
Junior Member
2
10-14-2017, 04:07 AM
#8
The power supply unit functioned well for two weeks, but the machine stopped working. It seems the issue might be with the board or the BIOS being stuck.
9
99Zach99
10-14-2017, 04:07 AM #8

The power supply unit functioned well for two weeks, but the machine stopped working. It seems the issue might be with the board or the BIOS being stuck.

M
maestrowilldo
Member
142
10-14-2017, 04:07 AM
#9
Absolutely, it functions well with other hardware too—similar to how another PSU works on my setup. It seems to depend on the motherboard and a specific Flex PSU brand/model. I own two different Flex PSU models, each showing distinct behavior: one spins up the CPU cooler silently, while the other produces a ticking sound with fan cycling. I’m grateful for your assistance and efforts. I’ve verified cables and connections; everything appears fine. The PSU operated reliably for about two weeks before failing. I also tested it by placing only the CPU and RAM outside the case, but the issue persisted. If I can’t resolve this, I might need to upgrade my motherboard or get a newer CPU to fit my case.
M
maestrowilldo
10-14-2017, 04:07 AM #9

Absolutely, it functions well with other hardware too—similar to how another PSU works on my setup. It seems to depend on the motherboard and a specific Flex PSU brand/model. I own two different Flex PSU models, each showing distinct behavior: one spins up the CPU cooler silently, while the other produces a ticking sound with fan cycling. I’m grateful for your assistance and efforts. I’ve verified cables and connections; everything appears fine. The PSU operated reliably for about two weeks before failing. I also tested it by placing only the CPU and RAM outside the case, but the issue persisted. If I can’t resolve this, I might need to upgrade my motherboard or get a newer CPU to fit my case.