F5F Stay Refreshed Hardware Desktop System failure detected. Please check connections and power source.

System failure detected. Please check connections and power source.

System failure detected. Please check connections and power source.

E
Ez_i
Junior Member
Find
2
06-09-2016, 03:27 PM
#1
Hi everyone, I'm working on reviving an older PC and have encountered a booting problem despite replacing all components. I've reviewed the issue online but haven't found a clear cause. After connecting everything correctly and trying to power it on, the motherboard shows its LED on the back, suggesting power is reaching it. However, when I press the power button, it briefly lights up then shuts off completely, and nothing boots. I noticed my PSU only has a 4-pin connector while the motherboard uses an 8-pin slot. After searching, it seems the system should still run if the motherboard doesn't need excessive power. Any suggestions or tips would be really helpful. Thanks!
Reply
Reply
E
Ez_i
06-09-2016, 03:27 PM #1

Hi everyone, I'm working on reviving an older PC and have encountered a booting problem despite replacing all components. I've reviewed the issue online but haven't found a clear cause. After connecting everything correctly and trying to power it on, the motherboard shows its LED on the back, suggesting power is reaching it. However, when I press the power button, it briefly lights up then shuts off completely, and nothing boots. I noticed my PSU only has a 4-pin connector while the motherboard uses an 8-pin slot. After searching, it seems the system should still run if the motherboard doesn't need excessive power. Any suggestions or tips would be really helpful. Thanks!

Reply
Reply
D
dani2401
Member
Find
226
06-15-2016, 07:04 AM
#2
Verify your RAM connection. The BIOS might be the issue. Is the CPU cooler functioning properly? A faulty cable could be causing the problem. There are several potential causes.
Reply
Reply
D
dani2401
06-15-2016, 07:04 AM #2

Verify your RAM connection. The BIOS might be the issue. Is the CPU cooler functioning properly? A faulty cable could be causing the problem. There are several potential causes.

Reply
Reply
T
thingul
Member
Find
136
07-02-2016, 08:06 AM
#3
Ram is slotted in fine, unsure about the cpu cooler as the pc doesn't even start up
Reply
Reply
T
thingul
07-02-2016, 08:06 AM #3

Ram is slotted in fine, unsure about the cpu cooler as the pc doesn't even start up

Reply
Reply
X
xKaan
Junior Member
Find
17
07-14-2016, 07:22 PM
#4
The power supply unit you're using is the one that stopped working when the Power Good signal dropped below expectations, and switching to a new one fixed the problem. I own a budget-friendly PSU tester that provides reliable voltage readings along with the Power Good signal.
Reply
Reply
X
xKaan
07-14-2016, 07:22 PM #4

The power supply unit you're using is the one that stopped working when the Power Good signal dropped below expectations, and switching to a new one fixed the problem. I own a budget-friendly PSU tester that provides reliable voltage readings along with the Power Good signal.

Reply
Reply