F5F Stay Refreshed Hardware Desktop System failure begins with a cyberpunk crash, followed by additional malfunctions and blue screen errors.

System failure begins with a cyberpunk crash, followed by additional malfunctions and blue screen errors.

System failure begins with a cyberpunk crash, followed by additional malfunctions and blue screen errors.

J
JamTheJoker
Member
102
03-09-2023, 03:49 PM
#1
I recently upgraded to a compact form factor system and encountered several stability concerns. Cyberpunk continues to fail at launching, often displaying errors or freezing, sometimes resulting in a blue screen and shutdown. Spider Man Miles Morales frequently crashes during startup when ray tracing is active, even without real-time rendering, leading to PC power loss. Blade & Sorcery causes a blue screen upon opening the Arena map, also forcing shutdowns. OpenTTD and Beat Saber performed without issues. My old RX 9070 with the 2060 chip has been replaced by a newer model, and both Cyberpunk and Miles Morales ran smoothly for some time. I’m prepared to share diagnostic files if needed. Operating system: Windows 10 Home 64-bit, version 22H2. Hardware: AMD Ryzen 7 7800X3D (undervolted), RX 9070 XT ROG STRIX B650E-I, Corsair Vengeance 32GB DDR5-6400, Samsung 990 PRO 4TB SSD, BIOS v3057. Performance notes: Sometimes the PC simply powers off and restarts after a game session. Games affected include Cities Skylines. I’ve added this information to relevant titles and updated it on July 30, 2025.
J
JamTheJoker
03-09-2023, 03:49 PM #1

I recently upgraded to a compact form factor system and encountered several stability concerns. Cyberpunk continues to fail at launching, often displaying errors or freezing, sometimes resulting in a blue screen and shutdown. Spider Man Miles Morales frequently crashes during startup when ray tracing is active, even without real-time rendering, leading to PC power loss. Blade & Sorcery causes a blue screen upon opening the Arena map, also forcing shutdowns. OpenTTD and Beat Saber performed without issues. My old RX 9070 with the 2060 chip has been replaced by a newer model, and both Cyberpunk and Miles Morales ran smoothly for some time. I’m prepared to share diagnostic files if needed. Operating system: Windows 10 Home 64-bit, version 22H2. Hardware: AMD Ryzen 7 7800X3D (undervolted), RX 9070 XT ROG STRIX B650E-I, Corsair Vengeance 32GB DDR5-6400, Samsung 990 PRO 4TB SSD, BIOS v3057. Performance notes: Sometimes the PC simply powers off and restarts after a game session. Games affected include Cities Skylines. I’ve added this information to relevant titles and updated it on July 30, 2025.

D
Doglover8000
Member
51
03-09-2023, 04:25 PM
#2
The error messages Windows displayed during a blue screen were: page_fault_in_nonpaged_area and dpc_watchdog_violation.
D
Doglover8000
03-09-2023, 04:25 PM #2

The error messages Windows displayed during a blue screen were: page_fault_in_nonpaged_area and dpc_watchdog_violation.

T
TiemDiamond
Member
114
03-09-2023, 10:38 PM
#3
I also observed that my motherboard activated its small warning LED during startup. The sequence showed yellow for DRAM, then red for CPU, white for VGA, followed by a yellow-green light indicating the boot device. After that, it proceeded to post, leaving me uncertain about the issue.
T
TiemDiamond
03-09-2023, 10:38 PM #3

I also observed that my motherboard activated its small warning LED during startup. The sequence showed yellow for DRAM, then red for CPU, white for VGA, followed by a yellow-green light indicating the boot device. After that, it proceeded to post, leaving me uncertain about the issue.

M
MattHaan
Member
131
03-10-2023, 05:47 AM
#4
Halt any further speed adjustments, including RAM settings. Reset the CMOS for a fresh start during diagnostics—it’s likely the memory issue, so skip XMP or expo tweaks right now. This is standard procedure to ensure accurate testing. Once more, pause overclocking.
M
MattHaan
03-10-2023, 05:47 AM #4

Halt any further speed adjustments, including RAM settings. Reset the CMOS for a fresh start during diagnostics—it’s likely the memory issue, so skip XMP or expo tweaks right now. This is standard procedure to ensure accurate testing. Once more, pause overclocking.

S
Shad0wHydra13
Senior Member
716
03-11-2023, 08:45 AM
#5
Ram. Refer to what was mentioned earlier. No overclocking allowed.
S
Shad0wHydra13
03-11-2023, 08:45 AM #5

Ram. Refer to what was mentioned earlier. No overclocking allowed.