F5F Stay Refreshed Hardware Desktop System fails to start with AsRock branding displayed.

System fails to start with AsRock branding displayed.

System fails to start with AsRock branding displayed.

D
DuckManWoo
Member
103
10-14-2019, 01:27 AM
#1
Hey there, I've been using my computer for about two to three weeks now. I was tweaking the fan settings in the BIOS when I tried to save and restart, but it got stuck on the Asrock logo. After a while, the system booted up, fans started spinning, and then the BIOS displayed a message like "press f2." It then showed the Asrock logo with the loading circle spinning, and it just stayed there.

What I've tried so far:
- CMOS reset (no luck)
- Reinstalling RAM cleanly
- Reinstalling Windows
- Reseating everything except the processor
- Updating all drivers

Interestingly, when I set my BIOS to ultra fast boot, the Asrock logo disappeared and I could easily get into Windows. Sometimes the logo would hang, but pressing the reset button let me back in. This makes me think it might be a software problem rather than a hardware one. I initially thought there could be an SSD issue, but that wouldn't work if I couldn't access it at all during ultra fast boot.

This isn’t a long-term fix for me, and I’m leaning toward switching to an MSI B450 Mortar since I’ve seen many users face the same problem with Asrock boards.
Details:
- Motherboard: Asrock B450m Steel Legend
- CPU: Ryzen 5 3600
- RAM: 2x8GB
- Processor: HyperX Fury 3200MHz
- GPU: RX 5700 XT
- PSU: Seasonic Gold GM 650W
- SSD: Kingston NVME
- Case: Core V21
D
DuckManWoo
10-14-2019, 01:27 AM #1

Hey there, I've been using my computer for about two to three weeks now. I was tweaking the fan settings in the BIOS when I tried to save and restart, but it got stuck on the Asrock logo. After a while, the system booted up, fans started spinning, and then the BIOS displayed a message like "press f2." It then showed the Asrock logo with the loading circle spinning, and it just stayed there.

What I've tried so far:
- CMOS reset (no luck)
- Reinstalling RAM cleanly
- Reinstalling Windows
- Reseating everything except the processor
- Updating all drivers

Interestingly, when I set my BIOS to ultra fast boot, the Asrock logo disappeared and I could easily get into Windows. Sometimes the logo would hang, but pressing the reset button let me back in. This makes me think it might be a software problem rather than a hardware one. I initially thought there could be an SSD issue, but that wouldn't work if I couldn't access it at all during ultra fast boot.

This isn’t a long-term fix for me, and I’m leaning toward switching to an MSI B450 Mortar since I’ve seen many users face the same problem with Asrock boards.
Details:
- Motherboard: Asrock B450m Steel Legend
- CPU: Ryzen 5 3600
- RAM: 2x8GB
- Processor: HyperX Fury 3200MHz
- GPU: RX 5700 XT
- PSU: Seasonic Gold GM 650W
- SSD: Kingston NVME
- Case: Core V21

D
Digger12606
Junior Member
31
10-15-2019, 05:27 AM
#2
In the BIOS you can turn off the logo display or turn on a detailed printout of its actions. Doing so helps identify where it becomes unresponsive. Check if the internal speaker emits any tones or if the motherboard provides a diagnostic readout.
D
Digger12606
10-15-2019, 05:27 AM #2

In the BIOS you can turn off the logo display or turn on a detailed printout of its actions. Doing so helps identify where it becomes unresponsive. Check if the internal speaker emits any tones or if the motherboard provides a diagnostic readout.

X
65
10-16-2019, 05:25 PM
#3
You might be experiencing issues with your HDD/SSD or a USB device. An old USB microphone with a damaged connector could cause similar problems. Are there any other storage devices connected via SATA or USB?
X
xXSyntooxienXx
10-16-2019, 05:25 PM #3

You might be experiencing issues with your HDD/SSD or a USB device. An old USB microphone with a damaged connector could cause similar problems. Are there any other storage devices connected via SATA or USB?

A
AWSOMO3000
Member
166
10-18-2019, 11:17 AM
#4
It's fine, just the 1TB SSD NVMe unit—no issues at all.
A
AWSOMO3000
10-18-2019, 11:17 AM #4

It's fine, just the 1TB SSD NVMe unit—no issues at all.

S
Sachouille9
Member
70
10-24-2019, 11:40 AM
#5
The logo isn't showing properly, so it's using the default window background instead. I'll try to find a more detailed print setting for you.
S
Sachouille9
10-24-2019, 11:40 AM #5

The logo isn't showing properly, so it's using the default window background instead. I'll try to find a more detailed print setting for you.

C
Caribbean_Blue
Senior Member
609
10-24-2019, 01:33 PM
#6
Yes, there are additional USB devices besides the keyboard and mouse.
C
Caribbean_Blue
10-24-2019, 01:33 PM #6

Yes, there are additional USB devices besides the keyboard and mouse.

S
Sircles
Junior Member
2
10-27-2019, 04:34 AM
#7
Only the headset is present; it hasn't been started yet because USB devices aren't connected.
S
Sircles
10-27-2019, 04:34 AM #7

Only the headset is present; it hasn't been started yet because USB devices aren't connected.

P
pertipoju
Member
187
11-12-2019, 04:09 AM
#8
It doesn’t appear in your bios.
P
pertipoju
11-12-2019, 04:09 AM #8

It doesn’t appear in your bios.