F5F Stay Refreshed Hardware Desktop System fails to start, unsure of solutions Hardware or software issues might be the cause

System fails to start, unsure of solutions Hardware or software issues might be the cause

System fails to start, unsure of solutions Hardware or software issues might be the cause

Pages (2): Previous 1 2
V
Vichoflo
Senior Member
396
11-17-2024, 01:12 AM
#11
I typically shut down the PC after a few cycles. @Fasauceome
V
Vichoflo
11-17-2024, 01:12 AM #11

I typically shut down the PC after a few cycles. @Fasauceome

G
Gustavgurra03
Posting Freak
815
12-01-2024, 08:49 PM
#12
Provide additional details and behavior might shift. If it doesn't, reposition the CPU (remember to turn the cooler clockwise before removal). If still no improvement, think about sending it back for repair.
G
Gustavgurra03
12-01-2024, 08:49 PM #12

Provide additional details and behavior might shift. If it doesn't, reposition the CPU (remember to turn the cooler clockwise before removal). If still no improvement, think about sending it back for repair.

M
MeatballMemes
Junior Member
25
12-10-2024, 03:24 AM
#13
They didn’t work at first, but I’m trying to handle an RMA. Could you clarify—would a faulty PSU stop your PC from getting power? Otherwise, it seems the issue is likely with the motherboard.
M
MeatballMemes
12-10-2024, 03:24 AM #13

They didn’t work at first, but I’m trying to handle an RMA. Could you clarify—would a faulty PSU stop your PC from getting power? Otherwise, it seems the issue is likely with the motherboard.

G
GG_boy
Member
68
12-11-2024, 09:26 PM
#14
Usually a power reset isn't the problem here. Most likely it's related to the board, processor, or RAM. In my experience, 90% of these cases involve the board. If you can't even access the BIOS, that's a strong sign. Another factor to consider is RAM training. I'd suggest running your system through 10 loops to check for anomalies. Make sure you consult the motherboard manual to determine the appropriate RAM speed for your setup—sometimes mismatched speeds cause issues. If power cycling doesn't resolve the issue after 10 attempts, try using the other stick. If nothing changes, a board replacement might be necessary. CPU failures are rare, especially with my extensive professional experience.
G
GG_boy
12-11-2024, 09:26 PM #14

Usually a power reset isn't the problem here. Most likely it's related to the board, processor, or RAM. In my experience, 90% of these cases involve the board. If you can't even access the BIOS, that's a strong sign. Another factor to consider is RAM training. I'd suggest running your system through 10 loops to check for anomalies. Make sure you consult the motherboard manual to determine the appropriate RAM speed for your setup—sometimes mismatched speeds cause issues. If power cycling doesn't resolve the issue after 10 attempts, try using the other stick. If nothing changes, a board replacement might be necessary. CPU failures are rare, especially with my extensive professional experience.

Pages (2): Previous 1 2