System fails to start due to insufficient RAM on a 128GB device.
System fails to start due to insufficient RAM on a 128GB device.
I increased the memory in my server case from 32GB to 128GB using Corsair Vengeance LPX 4x32. It matches the approved RAM for my motherboard, which is an Asus ROG Strix B550-F. The system won't boot when DOCP(XMP) is enabled or disabled, even with a manual speed setting of 3200Mhz. Consider checking the XMP profile settings or ensuring the correct driver is installed.
Testing with a 64GB RAM setup to rule out faulty memory. Analyzing system behavior and checking for any error indicators. Also, confirming which debug lights your motherboard displays.
I attempted with only 64GB, regretfully I hadn't mentioned that earlier—it caused issues. Despite that, the RAM functions properly; the PC boots when XMP is turned off, and it runs at the default speed around 2133. I’m aiming for 3200 but need to confirm if that’s compatible. Regarding the LED light, it appears to be an orange one.
I'll give it a shot, thanks. Maybe I should have chosen 2x64 after all.