System fails to power on following Ethernet installation.
System fails to power on following Ethernet installation.
Hello! Your new PC seems to be working well until you install the Ethernet card, at which point it stops booting. This could be due to driver issues or incorrect installation. Try checking the Ethernet port connections, ensuring the card is properly seated, and verifying that your BIOS supports the device. If problems persist, reinstalling the network drivers might help.
Consider resetting the system by removing the CMOS. Disconnect the power cable from the power supply, take out the battery from the motherboard, press the power button on the computer for half a minute, then reinsert the battery and see if everything functions properly.