System crashes during startup on power-on.

Pages (2): 1 2 Next

Marco0_0
Junior Member

09-24-2016, 05:10 PM

Hello, I'm experiencing problems where my PC frequently restarts and fails to boot Windows from the M.2 drive or the Windows installer from the USB. After each boot, it restarts again, freezes during boot, or ends with a BSOD. The PC specs are shown in the attached image and a video of the issue is included (VID_20240224_194150.mp4).

Marco0_0

09-24-2016, 05:10 PM #1

Goljat12
Member

213

09-24-2016, 11:10 PM

It could be a temperature problem... I notice that overheating might cause the system to stop starting and display a blue screen

Goljat12

09-24-2016, 11:10 PM #2

It could be a temperature problem... I notice that overheating might cause the system to stop starting and display a blue screen

apaek0
Member

09-25-2016, 03:53 AM

All components function properly and temperatures remain stable after checking via BIOS.

apaek0

09-25-2016, 03:53 AM #3

All components function properly and temperatures remain stable after checking via BIOS.

xXMLGSwag360Xx
Member

09-25-2016, 09:48 PM

Check if the SSD is functioning properly and see if the issue persists.

xXMLGSwag360Xx

09-25-2016, 09:48 PM #4

Check if the SSD is functioning properly and see if the issue persists.

Thermite_RB6S
Member

09-25-2016, 10:22 PM

The SSD functions properly on another machine, but it fails to start a Windows installation USB drive.

Thermite_RB6S

09-25-2016, 10:22 PM #5

The SSD functions properly on another machine, but it fails to start a Windows installation USB drive.

trilaminat
Junior Member

09-26-2016, 04:24 AM

Remove the side panel and verify all components are correctly placed. A loose or defective cable could be the issue.

trilaminat

09-26-2016, 04:24 AM #6

Remove the side panel and verify all components are correctly placed. A loose or defective cable could be the issue.

CrimsonGuard34
Member

226

10-03-2016, 06:05 PM

Just open Windows and connect a USB drive to the motherboard using a Windows installation media.

CrimsonGuard34

10-03-2016, 06:05 PM #7

Just open Windows and connect a USB drive to the motherboard using a Windows installation media.

Skewald980
Member

104

10-03-2016, 07:11 PM

I can't rely on a USB Windows installer because it fails to bypass the motherboard logo. I've already attempted that.

Skewald980

10-03-2016, 07:11 PM #8

I can't rely on a USB Windows installer because it fails to bypass the motherboard logo. I've already attempted that.

KIRO_HD
Member

216

10-03-2016, 08:07 PM

Change the boot sequence within the BIOS settings.

KIRO_HD

10-03-2016, 08:07 PM #9

Change the boot sequence within the BIOS settings.

NayZayRay
Member

189

10-09-2016, 11:50 PM

#10

This will instruct the system to attempt booting from the USB drive.

NayZayRay

10-09-2016, 11:50 PM #10

This will instruct the system to attempt booting from the USB drive.

Pages (2): 1 2 Next