F5F Stay Refreshed Hardware Desktop System can’t reach BIOS but everything else works. Windows 11 is running normally. What’s happening?

System can’t reach BIOS but everything else works. Windows 11 is running normally. What’s happening?

System can’t reach BIOS but everything else works. Windows 11 is running normally. What’s happening?

Pages (3): Previous 1 2 3
K
kingjuul
Junior Member
16
10-05-2021, 06:18 PM
#21
Sure, it will delete any content already in the bios. You won't use regular bios files but complete ones. If you search online, some people have gathered default files that you can use to replace existing ones. You might need to adjust the files to maintain things like SSID and MAC address serial numbers. The guides usually explain the steps for this process.
K
kingjuul
10-05-2021, 06:18 PM #21

Sure, it will delete any content already in the bios. You won't use regular bios files but complete ones. If you search online, some people have gathered default files that you can use to replace existing ones. You might need to adjust the files to maintain things like SSID and MAC address serial numbers. The guides usually explain the steps for this process.

M
mat_fram
Posting Freak
776
10-05-2021, 09:31 PM
#22
I've reached the decision that a complete computer overhaul is needed to fix the problem. This hasn't been tried yet because it takes time. I consulted NotBIOS, the YouTube expert. They suggested there could be interference anywhere—possibly a USB port, USB-C, or even some RGB strips. It seems everything was functioning properly after installation, including BIOS settings post-build. Later, I added RGB fans and similar components, which might have contributed. A full reset is likely the solution. I'll keep you posted.
M
mat_fram
10-05-2021, 09:31 PM #22

I've reached the decision that a complete computer overhaul is needed to fix the problem. This hasn't been tried yet because it takes time. I consulted NotBIOS, the YouTube expert. They suggested there could be interference anywhere—possibly a USB port, USB-C, or even some RGB strips. It seems everything was functioning properly after installation, including BIOS settings post-build. Later, I added RGB fans and similar components, which might have contributed. A full reset is likely the solution. I'll keep you posted.

S
Sally6500
Junior Member
26
10-05-2021, 09:54 PM
#23
Yes, it's a relatively new system and remains covered under warranty.
S
Sally6500
10-05-2021, 09:54 PM #23

Yes, it's a relatively new system and remains covered under warranty.

S
slammajamma28
Junior Member
36
10-06-2021, 04:01 AM
#24
I didn't flash your BIOS, but I can help you with the process if you need guidance.
S
slammajamma28
10-06-2021, 04:01 AM #24

I didn't flash your BIOS, but I can help you with the process if you need guidance.

C
Camsell
Member
207
10-07-2021, 12:10 AM
#25
Downloaded the BIOS update from the official ASUS site for this motherboard. Set the USB to FAT32 format. Connected the USB stick via the BIOS USB port on the IO shield. Pressed the flash button and waited for the process to complete.
C
Camsell
10-07-2021, 12:10 AM #25

Downloaded the BIOS update from the official ASUS site for this motherboard. Set the USB to FAT32 format. Connected the USB stick via the BIOS USB port on the IO shield. Pressed the flash button and waited for the process to complete.

Pages (3): Previous 1 2 3