F5F Stay Refreshed Hardware Desktop System becomes unresponsive repeatedly.

System becomes unresponsive repeatedly.

System becomes unresponsive repeatedly.

Pages (3): 1 2 3 Next
J
Jrsillyface
Junior Member
11
08-26-2020, 05:41 AM
#1
Recently my computer has been slowing down, especially during startup. It stays on for about five minutes or more after being powered on for over eight hours. I replaced some RAM because one module wasn’t working, but that only provided a short fix. The temperatures are normal too. System: Ryzen 5600X with 32GB Corsair Vengeance 3200 (new RAM) EVGA KO 6GB 2060 Corsair CV650 80+ Bronze power supply ASUS ROG Strix B-450F Gaming ATX AM4 MOBO Coolermaster 240L liquid CPU cooler Western Master 1TB SSD (possibly a 7-year-old drive).
J
Jrsillyface
08-26-2020, 05:41 AM #1

Recently my computer has been slowing down, especially during startup. It stays on for about five minutes or more after being powered on for over eight hours. I replaced some RAM because one module wasn’t working, but that only provided a short fix. The temperatures are normal too. System: Ryzen 5600X with 32GB Corsair Vengeance 3200 (new RAM) EVGA KO 6GB 2060 Corsair CV650 80+ Bronze power supply ASUS ROG Strix B-450F Gaming ATX AM4 MOBO Coolermaster 240L liquid CPU cooler Western Master 1TB SSD (possibly a 7-year-old drive).

S
smileymensje
Junior Member
15
08-26-2020, 12:54 PM
#2
Explore BIOS options and fix static values for all core multipliers and ratios to 40, set VCore to 1.25v llc medium. Proceed with Prime95 large FFTs and observe if RAM starts failing—this suggests unstable RAM, which is frustrating. Manually adjusting CPU frequency and voltage eliminates the issue, as you'd expect around 4.4–4.6GHz for all cores on Zen3.
S
smileymensje
08-26-2020, 12:54 PM #2

Explore BIOS options and fix static values for all core multipliers and ratios to 40, set VCore to 1.25v llc medium. Proceed with Prime95 large FFTs and observe if RAM starts failing—this suggests unstable RAM, which is frustrating. Manually adjusting CPU frequency and voltage eliminates the issue, as you'd expect around 4.4–4.6GHz for all cores on Zen3.

K
Komodo88
Senior Member
749
08-28-2020, 04:34 AM
#3
Settings aren't showing up in your BIOS, or you might be misunderstanding them. The issue with your PC freezing could be related to either the old RAM or a compatibility problem with the new RAM you installed today.
K
Komodo88
08-28-2020, 04:34 AM #3

Settings aren't showing up in your BIOS, or you might be misunderstanding them. The issue with your PC freezing could be related to either the old RAM or a compatibility problem with the new RAM you installed today.

C
chrisnoble
Member
103
08-28-2020, 08:23 PM
#4
Probably still a RAM problem—enter advanced mode (f7), open AI tweaker, adjust CPU core ratio to 40, set voltage to fixed, then to 1.25v. In digi+ VRM submenu, calibrate both VDDCR and SOC load lines to medium. Save and exit BIOS, then run Prime95 large FFTs. Capture a screenshot of the thaiphoon burner since you might need to tweak your RAM manually; knowing the IC will be useful.
C
chrisnoble
08-28-2020, 08:23 PM #4

Probably still a RAM problem—enter advanced mode (f7), open AI tweaker, adjust CPU core ratio to 40, set voltage to fixed, then to 1.25v. In digi+ VRM submenu, calibrate both VDDCR and SOC load lines to medium. Save and exit BIOS, then run Prime95 large FFTs. Capture a screenshot of the thaiphoon burner since you might need to tweak your RAM manually; knowing the IC will be useful.

T
TransHailey
Member
57
08-28-2020, 08:44 PM
#5
The selected value is muted and can't be adjusted.
T
TransHailey
08-28-2020, 08:44 PM #5

The selected value is muted and can't be adjusted.

T
Toxic_Wolfy
Junior Member
44
09-05-2020, 03:58 AM
#6
Take a snapshot of the image
Send the picture here
T
Toxic_Wolfy
09-05-2020, 03:58 AM #6

Take a snapshot of the image
Send the picture here

G
Gariel_Ezmo
Junior Member
7
09-21-2020, 11:57 PM
#7
Core ratio set to 40
G
Gariel_Ezmo
09-21-2020, 11:57 PM #7

Core ratio set to 40

N
NGNLxReiga
Member
186
09-22-2020, 06:37 AM
#8
It appears to be a frustrated message, possibly expressing irritation or stress.
N
NGNLxReiga
09-22-2020, 06:37 AM #8

It appears to be a frustrated message, possibly expressing irritation or stress.

R
Rantruffs
Member
59
09-22-2020, 10:48 PM
#9
It's hard to tell if someone is really upset just from text. You mentioned seeing CPU core ratios, which might help with settings.
R
Rantruffs
09-22-2020, 10:48 PM #9

It's hard to tell if someone is really upset just from text. You mentioned seeing CPU core ratios, which might help with settings.

D
DerpRaven
Junior Member
3
09-23-2020, 03:43 AM
#10
Recent BIOS updates are available for your system.
D
DerpRaven
09-23-2020, 03:43 AM #10

Recent BIOS updates are available for your system.

Pages (3): 1 2 3 Next