F5F Stay Refreshed Hardware Desktop Swapped storage and memory, now no screen.

Swapped storage and memory, now no screen.

Swapped storage and memory, now no screen.

Z
zYoshi20
Member
Find
63
11-01-2017, 12:51 AM
#1
Hello, your HP compaq 2400 is still working after the upgrade. The lack of display and beeps suggests a power or communication issue. Check the power connections and ensure the new SSD is properly seated. Verify that the RAM sticks are correctly installed and functioning. If the fan runs but nothing else appears, there may be a driver or firmware problem—try updating the BIOS or checking for compatible drivers. Also, listen carefully to any error sounds on the motherboard; they can indicate hardware faults.
Reply
Reply
Z
zYoshi20
11-01-2017, 12:51 AM #1

Hello, your HP compaq 2400 is still working after the upgrade. The lack of display and beeps suggests a power or communication issue. Check the power connections and ensure the new SSD is properly seated. Verify that the RAM sticks are correctly installed and functioning. If the fan runs but nothing else appears, there may be a driver or firmware problem—try updating the BIOS or checking for compatible drivers. Also, listen carefully to any error sounds on the motherboard; they can indicate hardware faults.

Reply
Reply
H
hotdog118
Junior Member
Find
5
11-01-2017, 12:51 AM
#2
Test each RAM stick separately, one at a time. If one functions independently, add another and see how it performs. Experiment with various pairs to identify any problematic combinations. Refer to page 14 of the manual to confirm compatibility.
Reply
Reply
H
hotdog118
11-01-2017, 12:51 AM #2

Test each RAM stick separately, one at a time. If one functions independently, add another and see how it performs. Experiment with various pairs to identify any problematic combinations. Refer to page 14 of the manual to confirm compatibility.

Reply
Reply