Sure, I can assist with overclocking. What system are you trying to optimize?

F5F Stay Refreshed Hardware Desktop Sure, I can assist with overclocking. What system are you trying to optimize?

Sure, I can assist with overclocking. What system are you trying to optimize?

Sure, I can assist with overclocking. What system are you trying to optimize?

_

_Duki_
Junior Member

48

07-20-2016, 04:24 PM

#1

Hi, I'm facing some odd problems with my CPU and memory overclocking. After saving and rebooting, the PC won't boot into BIOS and cycles a few times before restarting normally. It seems like the settings are being applied incorrectly even when I try 3.3GHz or use an XMP profile for RAM. In Ryzen Master I can manually reach 3.8GHz at 1.3625V without issues, but it requires launching the software each time. I've also updated the BIOS, but nothing seems to work. Any advice would be greatly appreciated.

_

_Duki_

07-20-2016, 04:24 PM #1

Hi, I'm facing some odd problems with my CPU and memory overclocking. After saving and rebooting, the PC won't boot into BIOS and cycles a few times before restarting normally. It seems like the settings are being applied incorrectly even when I try 3.3GHz or use an XMP profile for RAM. In Ryzen Master I can manually reach 3.8GHz at 1.3625V without issues, but it requires launching the software each time. I've also updated the BIOS, but nothing seems to work. Any advice would be greatly appreciated.

R

Remigiusz1991
Member

68

07-20-2016, 04:41 PM

#2

Yes, I adjusted the voltage settings.

R

Remigiusz1991

07-20-2016, 04:41 PM #2

Yes, I adjusted the voltage settings.

R

Raidex20
Posting Freak

751

07-21-2016, 07:34 PM

#3

I also tested 1.4V at 3.3GHz but got no results.

R

Raidex20

07-21-2016, 07:34 PM #3

I also tested 1.4V at 3.3GHz but got no results.

T

Trentqn
Member

150

07-27-2016, 10:16 PM

#4

Loadline tuning works differently in Ryzen Master and the BIOS.

T

Trentqn

07-27-2016, 10:16 PM #4

Loadline tuning works differently in Ryzen Master and the BIOS.

D

Dyriver
Member

145

08-05-2016, 10:08 PM

#5

To be truthful, I don't understand it well, so I'll take a look at that. Thanks!

D

Dyriver

08-05-2016, 10:08 PM #5

To be truthful, I don't understand it well, so I'll take a look at that. Thanks!

M

master_kingl
Member

93

08-09-2016, 05:57 AM

#6

It seems the device is experiencing an issue even after adjusting the disc priority, which is unusual.

M

master_kingl

08-09-2016, 05:57 AM #6

It seems the device is experiencing an issue even after adjusting the disc priority, which is unusual.