Stock IDling Temperatures and Voltage Data

mayan12345
Member

207

02-04-2019, 11:46 AM

Hey everyone, I just upgraded from a 7700k to the Ryzen 3950x and paired it with a Corsair H115i RGB PLATINUM 97 CFM liquid cooler. The idle temps are hovering between 46-55°C, which feels a bit high, and the voltage is sitting at 1.4V, also on the higher side. I haven’t pushed anything overclocked yet, except for the memory profile where DOCP is turned on. Are any of you noticing similar temps and voltages? Here’s the full list of parts: CPU, Ryzen 9 3950X, cooler, motherboard, RAM, storage drives, and a few peripherals. Let me know if you’re seeing anything comparable!

mayan12345

02-04-2019, 11:46 AM #1

rik66h73
Member

02-07-2019, 10:40 PM

For a 3950x it's not unusual—it falls within a reasonable range. What temperatures are observed when under load?

rik66h73

02-07-2019, 10:40 PM #2

For a 3950x it's not unusual—it falls within a reasonable range. What temperatures are observed when under load?

peter4everpan
Member

235

02-13-2019, 12:44 AM

Avoid exceeding maximum limits under continuous pressure. Keep temperature near 68-71°C.

peter4everpan

02-13-2019, 12:44 AM #3

Avoid exceeding maximum limits under continuous pressure. Keep temperature near 68-71°C.

SayNoToNWO
Posting Freak

879

02-16-2019, 10:52 AM

Those idle periods don't count if temperatures stay high during operation.

SayNoToNWO

02-16-2019, 10:52 AM #4

Those idle periods don't count if temperatures stay high during operation.

Catsstate
Member

146

02-17-2019, 06:36 PM

Thanks for the update. I was mainly concerned about the voltage because it looked too high, so I assumed the motherboard was set to a higher level by default.

Catsstate

02-17-2019, 06:36 PM #5

Thanks for the update. I was mainly concerned about the voltage because it looked too high, so I assumed the motherboard was set to a higher level by default.

liang_hao_yan
Member

221

02-23-2019, 10:41 AM

The VID represents the voltage the CPU requests. You have the option to configure a different VDD supply. A value of 1.35 might suffice, while 1.4 is typical for a 3950x model.

liang_hao_yan

02-23-2019, 10:41 AM #6

The VID represents the voltage the CPU requests. You have the option to configure a different VDD supply. A value of 1.35 might suffice, while 1.4 is typical for a 3950x model.

Luckitty
Junior Member

02-25-2019, 02:16 AM

Thanks! That was useful.

Luckitty

02-25-2019, 02:16 AM #7

Thanks! That was useful.