F5F Stay Refreshed Power Users Networks Steam remote play on PC via Ethernet setup

Steam remote play on PC via Ethernet setup

Steam remote play on PC via Ethernet setup

M
MavrosGR
Senior Member
579
01-22-2016, 05:31 AM
#1
It might be unusual, but it’s doable to connect the same Ethernet cable to both devices for remote streaming. Your Windows 10 PC can handle the connection, and the Linux machine without Wi-Fi can also manage it. Just ensure the cables are properly connected and check that your streaming software supports multi-device input.
M
MavrosGR
01-22-2016, 05:31 AM #1

It might be unusual, but it’s doable to connect the same Ethernet cable to both devices for remote streaming. Your Windows 10 PC can handle the connection, and the Linux machine without Wi-Fi can also manage it. Just ensure the cables are properly connected and check that your streaming software supports multi-device input.

N
Nejc007
Senior Member
707
01-22-2016, 09:46 PM
#2
Assuming your Windows PC is connected via WiFi and an Ethernet port is available, you can link it to a Linux machine. Each network adapter must have a static IP configured on the same subnet so both devices can communicate smoothly.
N
Nejc007
01-22-2016, 09:46 PM #2

Assuming your Windows PC is connected via WiFi and an Ethernet port is available, you can link it to a Linux machine. Each network adapter must have a static IP configured on the same subnet so both devices can communicate smoothly.

M
Matke04
Posting Freak
825
01-24-2016, 06:53 AM
#3
I managed to make my Linux machine appear as a device in remote play on Steam from your Windows PC, but it didn’t show up on the Linux side. Both devices were configured with static IP addresses, though I’m still unsure since I’m not very familiar with Linux.
M
Matke04
01-24-2016, 06:53 AM #3

I managed to make my Linux machine appear as a device in remote play on Steam from your Windows PC, but it didn’t show up on the Linux side. Both devices were configured with static IP addresses, though I’m still unsure since I’m not very familiar with Linux.

A
ariel_8888
Member
214
01-25-2016, 05:24 PM
#4
Configure the wired connection as private and/or turn off the firewall manually within the Windows settings.
A
ariel_8888
01-25-2016, 05:24 PM #4

Configure the wired connection as private and/or turn off the firewall manually within the Windows settings.