F5F Stay Refreshed Hardware Desktop Starting a PC without a CPU cooler is possible but may affect performance and cooling efficiency.

Starting a PC without a CPU cooler is possible but may affect performance and cooling efficiency.

Starting a PC without a CPU cooler is possible but may affect performance and cooling efficiency.

Pages (3): Previous 1 2 3 Next
K
KamikazeUD
Junior Member
13
08-27-2018, 09:32 AM
#11
First, there’s the overheating concern... Then he should verify if it’s running properly... (a couple seconds) Lastly, I’m not urging him to flash the BIOS without a cooler or switch to Windows... it’s safe for just a short time... just relax, buddy, I’m not Jay, I don’t like burning out 1650 GPUs.
K
KamikazeUD
08-27-2018, 09:32 AM #11

First, there’s the overheating concern... Then he should verify if it’s running properly... (a couple seconds) Lastly, I’m not urging him to flash the BIOS without a cooler or switch to Windows... it’s safe for just a short time... just relax, buddy, I’m not Jay, I don’t like burning out 1650 GPUs.

A
Andy_206
Member
58
08-27-2018, 01:13 PM
#12
The stock coolers are very simple to install and remove. I’m with @Statik, use a cooler. However, anyone who says it’s safe can risk damaging your CPU or causing early wear. It’s like an auto mechanic telling you it’s fine to run the engine without oil for five minutes. Would you really take that chance? Of course not—just because the motor might not stall doesn’t mean it’s safe. Don’t bring your car back to that shop.
A
Andy_206
08-27-2018, 01:13 PM #12

The stock coolers are very simple to install and remove. I’m with @Statik, use a cooler. However, anyone who says it’s safe can risk damaging your CPU or causing early wear. It’s like an auto mechanic telling you it’s fine to run the engine without oil for five minutes. Would you really take that chance? Of course not—just because the motor might not stall doesn’t mean it’s safe. Don’t bring your car back to that shop.

H
hrgriff
Senior Member
573
08-27-2018, 09:45 PM
#13
Terrible, terrible, awful.
H
hrgriff
08-27-2018, 09:45 PM #13

Terrible, terrible, awful.

N
NateDawgg2020
Member
69
08-28-2018, 02:50 AM
#14
The box doesn’t confirm that, though the NewEgg listing claimed it did. I considered using an Athlon to modify the BIOS if the Athlon failed. Are you looking for the cheapest AMD processor that could handle a BIOS update in such a situation?
N
NateDawgg2020
08-28-2018, 02:50 AM #14

The box doesn’t confirm that, though the NewEgg listing claimed it did. I considered using an Athlon to modify the BIOS if the Athlon failed. Are you looking for the cheapest AMD processor that could handle a BIOS update in such a situation?

U
umizou1393
Senior Member
253
08-29-2018, 04:39 AM
#15
I'm not suggesting he’ll instantly melt his CPU. That doesn’t diminish the danger involved. It’s clear to recommend he spends about two minutes and uses a stock cooler to avoid any risks. What I’m highlighting is that these situations often attract individuals with limited tech experience, and when they’re told to simply boot up without cooling, it can lead to serious problems.
U
umizou1393
08-29-2018, 04:39 AM #15

I'm not suggesting he’ll instantly melt his CPU. That doesn’t diminish the danger involved. It’s clear to recommend he spends about two minutes and uses a stock cooler to avoid any risks. What I’m highlighting is that these situations often attract individuals with limited tech experience, and when they’re told to simply boot up without cooling, it can lead to serious problems.

L
lucasjha
Member
56
08-30-2018, 12:23 AM
#16
The Athlon 200GE works with every single motherboard release BIOS. It's the most affordable option. AMD also provides updates to the BIOS for boards requiring them to support newer chip generations.
L
lucasjha
08-30-2018, 12:23 AM #16

The Athlon 200GE works with every single motherboard release BIOS. It's the most affordable option. AMD also provides updates to the BIOS for boards requiring them to support newer chip generations.

X
Xytrixz
Senior Member
552
09-19-2018, 01:32 AM
#17
For a brief moment it feels okay... his words suggest he knows something, otherwise I’d have adjusted my approach. New CPUs are far more robust, able to run efficiently even at high temperatures. In the end, I admit I made a mistake there.
X
Xytrixz
09-19-2018, 01:32 AM #17

For a brief moment it feels okay... his words suggest he knows something, otherwise I’d have adjusted my approach. New CPUs are far more robust, able to run efficiently even at high temperatures. In the end, I admit I made a mistake there.

Q
Qesterchen
Member
149
09-19-2018, 10:12 AM
#18
I noticed a guy had his oil changed, started his car, and the oil light stayed on after turning off the engine. He said he immediately shut it down. The technician who changed the oil didn’t add fresh oil. My friend ended up needing a new engine. I saw a video of Linus which might have inspired me, but since it was Linus I wanted to check before trying it myself. Thanks for all the advice. Would it be fine to just rest the cooler on top of the CPU without adding thermal compound? The compound was already causing issues.
Q
Qesterchen
09-19-2018, 10:12 AM #18

I noticed a guy had his oil changed, started his car, and the oil light stayed on after turning off the engine. He said he immediately shut it down. The technician who changed the oil didn’t add fresh oil. My friend ended up needing a new engine. I saw a video of Linus which might have inspired me, but since it was Linus I wanted to check before trying it myself. Thanks for all the advice. Would it be fine to just rest the cooler on top of the CPU without adding thermal compound? The compound was already causing issues.

D
DanielQMC
Member
103
09-19-2018, 10:29 AM
#19
It's a good option for relaxation, but it should last no more than a few minutes to an hour and a half.
D
DanielQMC
09-19-2018, 10:29 AM #19

It's a good option for relaxation, but it should last no more than a few minutes to an hour and a half.

A
Andoras
Junior Member
4
09-20-2018, 04:40 AM
#20
It seemed like you were having issues. Just need to secure it by tightening a few screws.
A
Andoras
09-20-2018, 04:40 AM #20

It seemed like you were having issues. Just need to secure it by tightening a few screws.

Pages (3): Previous 1 2 3 Next