Start up without electricity is possible. Use manual methods or backup power sources.
Start up without electricity is possible. Use manual methods or backup power sources.
The LED is positioned next to one of your M.2 connectors. It seems unclear its purpose, but it likely relates to a potential problem with the M.2 PCIe connection or the chipset beneath it. Was an M.2 device installed?
Do you require the protective metal cover, or is it safe to attempt removal without causing harm?
The one on the lower right? Alright, I'll back off—I don't know how to remove them and I'd rather not advise you on something you shouldn't do. The sound and actions suggest a mobo or PSU problem, or maybe the connection isn't set up correctly. Edited June 4, 2022 by An0maly_76
I examined some pictures of this board and didn’t see Debug LEDs, which is unusual but common. Unless they’re hidden under that cover (maybe possible, though unlikely), when you set up the cooler were you sure no thermal paste ended up where it shouldn’t be? Also, you’re not getting any power activation from the front panel switch? Updated June 4, 2022 by An0maly_76 Added more details
I spent some time and it looks much nearer, I believe it's an LED too unless I've cooled down since this began. I promise there isn't any thermal paste involved. We shouldn't have this issue.
If everything functions normally, the issue likely lies with the PSU or motherboard's capacitor. Faulty capacitors can prevent the system from powering on. A failing PSU might generate enough current to start after several tries, but if components are brand new, they should still be covered under warranty. You can use a multimeter to check voltage and follow a guide for safely disconnecting the ATX power supply. Leave any connected devices like hard drives in place during testing. This advice was updated on June 4, 2022 by An0maly_76 with additional details.
Nothing occurs when I press the power button on the front of the machine.