F5F Stay Refreshed Hardware Desktop SSDSSD experiences sluggish write speeds around 30MBPS, whereas it was faster at 260MBPS previously.

SSDSSD experiences sluggish write speeds around 30MBPS, whereas it was faster at 260MBPS previously.

SSDSSD experiences sluggish write speeds around 30MBPS, whereas it was faster at 260MBPS previously.

L
lkfTimLeung
Member
136
07-03-2022, 05:21 AM
#1
You're experiencing slow write speeds on your SSD again. It seems the issue might be related to how it's configured in BIOS or firmware. You previously fixed it by setting the SSD as a primary boot device and adjusting the boot order, but now the write speed is only 30MBPS instead of the expected rate. Checking for updates, enabling TRIM, ACHI, and write caching could help, though your SATA cable and motherboard limitations might still be factors.
L
lkfTimLeung
07-03-2022, 05:21 AM #1

You're experiencing slow write speeds on your SSD again. It seems the issue might be related to how it's configured in BIOS or firmware. You previously fixed it by setting the SSD as a primary boot device and adjusting the boot order, but now the write speed is only 30MBPS instead of the expected rate. Checking for updates, enabling TRIM, ACHI, and write caching could help, though your SATA cable and motherboard limitations might still be factors.

J
josh_k1310
Member
224
07-03-2022, 05:38 AM
#2
Consider upgrading to a more recent and improved model.
J
josh_k1310
07-03-2022, 05:38 AM #2

Consider upgrading to a more recent and improved model.

B
Blockwalker02
Member
181
07-03-2022, 07:19 AM
#3
bootm sequence shouldn't influence drive speed; otherwise it wouldn't matter. It might be due to old firmware or drive condition. To verify, run cmd as admin and type "WMIC /diskdrive get status" – this will show if your drive is functioning properly.
B
Blockwalker02
07-03-2022, 07:19 AM #3

bootm sequence shouldn't influence drive speed; otherwise it wouldn't matter. It might be due to old firmware or drive condition. To verify, run cmd as admin and type "WMIC /diskdrive get status" – this will show if your drive is functioning properly.

M
MoutazGamer
Junior Member
36
07-23-2022, 07:25 AM
#4
Google claims the boot order affects SSD performance, especially if HDD comes before SSD. Changing it to put HDD first can slow down the SSD since Windows runs on it. In command prompt you saw the status is "OK". There’s no firmware update available for your SSD besides the one for NM610PRO.
M
MoutazGamer
07-23-2022, 07:25 AM #4

Google claims the boot order affects SSD performance, especially if HDD comes before SSD. Changing it to put HDD first can slow down the SSD since Windows runs on it. In command prompt you saw the status is "OK". There’s no firmware update available for your SSD besides the one for NM610PRO.

F
Frigiel21
Member
187
07-27-2022, 01:30 AM
#5
The information you provided is inaccurate. The speeds shown in Crystal Disk Mark refer to the SSD's reading and writing capabilities, not daily usage performance. Watching the video from 4:37 to 5:43 will clarify this (link provided).
F
Frigiel21
07-27-2022, 01:30 AM #5

The information you provided is inaccurate. The speeds shown in Crystal Disk Mark refer to the SSD's reading and writing capabilities, not daily usage performance. Watching the video from 4:37 to 5:43 will clarify this (link provided).

B
BlueStar_LH
Posting Freak
842
07-27-2022, 05:39 AM
#6
The last two lines have a speed of 34 and 35.
B
BlueStar_LH
07-27-2022, 05:39 AM #6

The last two lines have a speed of 34 and 35.

J
Jasyul
Member
116
07-27-2022, 09:51 PM
#7
Your reading comprehension is within the typical range, yet your writing performance is quite limited. How much storage remains on your disk?
J
Jasyul
07-27-2022, 09:51 PM #7

Your reading comprehension is within the typical range, yet your writing performance is quite limited. How much storage remains on your disk?

H
Hogtatertots
Junior Member
1
07-27-2022, 10:49 PM
#8
Read is 270, I mentioned 34 and 35 are the final two rows for write speed. Not reading and write 60% free space.
H
Hogtatertots
07-27-2022, 10:49 PM #8

Read is 270, I mentioned 34 and 35 are the final two rows for write speed. Not reading and write 60% free space.