F5F Stay Refreshed Hardware Desktop Sound effect during playback occurs.

Sound effect during playback occurs.

Sound effect during playback occurs.

U
UnversedCake
Junior Member
39
04-22-2017, 08:25 PM
#1
Recently i've noticed that sometimes when sound is playing over the headphones (MM-100), there is some crackling noise, not the planar crincle, its like bad signal crackling but very faintly. It's not unusable but it is distracting and irritating, most importantly it happens intermittently. I'm running headphones through FiiO K5 Pro ESS and using the oratory preset for EqApo. When i tried to switch the usb port, the buzzing was insane and definitely unusable, there are like 2 usb ports out of 10 that do not constantly buzz, including the front IO. The usb 3.1 in particular produces the most buzz. I had dac/amps before this one but its only on this one that this happens and its weird, the two that do not buzz work 99.9% except the mentioned intermittent crackling. Switching to the onboard motherboard dac (Prime X370 Pro) the buzzing still continues unchanged, like on the 2 that ''work''. Now, when trying over the phone with the basic usb c to 3.5mm adapter, there is no crackling or buzzing at all, although i don't use any eq over phone. I can't isolate the issue specifically because its weird, it seems that headphones are fine but why would it have issues over on the pc side? Every other dac works as it should. Is there something on the dac's side that is faulty or on the pc's side? I also tried to uninstall and reinstall drivers for the k5, it didn't help.
U
UnversedCake
04-22-2017, 08:25 PM #1

Recently i've noticed that sometimes when sound is playing over the headphones (MM-100), there is some crackling noise, not the planar crincle, its like bad signal crackling but very faintly. It's not unusable but it is distracting and irritating, most importantly it happens intermittently. I'm running headphones through FiiO K5 Pro ESS and using the oratory preset for EqApo. When i tried to switch the usb port, the buzzing was insane and definitely unusable, there are like 2 usb ports out of 10 that do not constantly buzz, including the front IO. The usb 3.1 in particular produces the most buzz. I had dac/amps before this one but its only on this one that this happens and its weird, the two that do not buzz work 99.9% except the mentioned intermittent crackling. Switching to the onboard motherboard dac (Prime X370 Pro) the buzzing still continues unchanged, like on the 2 that ''work''. Now, when trying over the phone with the basic usb c to 3.5mm adapter, there is no crackling or buzzing at all, although i don't use any eq over phone. I can't isolate the issue specifically because its weird, it seems that headphones are fine but why would it have issues over on the pc side? Every other dac works as it should. Is there something on the dac's side that is faulty or on the pc's side? I also tried to uninstall and reinstall drivers for the k5, it didn't help.

R
Ruubiee17
Senior Member
572
05-05-2017, 06:18 AM
#2
Could the power supply be improperly connected?
R
Ruubiee17
05-05-2017, 06:18 AM #2

Could the power supply be improperly connected?

S
sbonardi
Junior Member
3
05-05-2017, 01:01 PM
#3
It seems the PC, monitor, and DAC share the same power strip. It might be easy to notice, though the power trip itself is inexpensive and outdated. The power switch’s light is flickering occasionally, but the power supply has always worked well so far.
S
sbonardi
05-05-2017, 01:01 PM #3

It seems the PC, monitor, and DAC share the same power strip. It might be easy to notice, though the power trip itself is inexpensive and outdated. The power switch’s light is flickering occasionally, but the power supply has always worked well so far.

Z
ZariPi
Junior Member
17
05-05-2017, 07:05 PM
#4
Functioned identically in other locations as in the referenced power strip.
Z
ZariPi
05-05-2017, 07:05 PM #4

Functioned identically in other locations as in the referenced power strip.

K
kingboyd
Member
63
05-06-2017, 01:37 AM
#5
Pick up one of these items and inspect the available outlets. It seems the ground pin might not be properly connected.
K
kingboyd
05-06-2017, 01:37 AM #5

Pick up one of these items and inspect the available outlets. It seems the ground pin might not be properly connected.

K
KTMrace640
Member
81
05-06-2017, 07:06 AM
#6
If the ground pin isn't connected, it can cause electrical issues. In EU, check your wiring rules and ensure proper grounding is followed. Consult local regulations or a professional for guidance.
K
KTMrace640
05-06-2017, 07:06 AM #6

If the ground pin isn't connected, it can cause electrical issues. In EU, check your wiring rules and ensure proper grounding is followed. Consult local regulations or a professional for guidance.

S
sunemoonsong
Senior Member
380
05-06-2017, 08:49 AM
#7
If your ground is floating, it means it isn't linked to Earth ground—usually not safe or advised. This issue often appears in older homes. Signs include static sounds in your audio, strange behavior of electronic gadgets, flickering lights, and even electric shocks. I referenced a photo as an illustration, but you should locate something similar that matches your outlet type. How do your outlets look, by the way?
S
sunemoonsong
05-06-2017, 08:49 AM #7

If your ground is floating, it means it isn't linked to Earth ground—usually not safe or advised. This issue often appears in older homes. Signs include static sounds in your audio, strange behavior of electronic gadgets, flickering lights, and even electric shocks. I referenced a photo as an illustration, but you should locate something similar that matches your outlet type. How do your outlets look, by the way?