Solving the X570 overclocking issue.
Solving the X570 overclocking issue.
Overclocking in the usual way won’t yield much unless you’re comfortable seeing your CPU slow down. Many seasoned overclockers who’ve been doing it since the beginning now recommend staying below 1.2V for the fixed VCore, which greatly restricts clock speed. Instead, focus on boosting memory and infinity fabric while adjusting a PBO setting to fully utilize your processor in both light and heavy threaded tasks. Several B450 boards can achieve this even with a 3900X for less than $150. However, if you’re patient, the X570 Tomahawk will soon be available...
basically any Aorus or Asus model in that price range. The Aorus Master / Strix-F for a more premium feel, the X570 Pro / Aorus Pro if you prefer something simpler. VRMs are consistent as I recall.
but the 3900X doesn't really boost performance much, and you usually see better results with PBO on Auto settings.
Traditional overclocking won't yield much unless you're willing to see your CPU slow down significantly. Many seasoned overclockers who've been doing it since its release now recommend staying below 1.2V fixed VCore, which greatly restricts clock speed. Instead, focus on boosting memory and infinity fabric while adjusting a PBO setting to fully utilize your processor in both light and heavy threaded tasks. Several B450 boards can achieve this even with a 3900X for under $150. However, if you're patient, the X570 Tomahawk is expected soon at around $200, offering impressive performance.
I agree with MSI over gigabyte, I was thinking about the master but noticed many people are facing problems on that board. I've discovered MSI is one of the most reliable boards I've had in the last 20 years, and most makers have done the same. Good luck!