SoC voltages 7800X3D

Pages (2): 1 2 Next

Cecelmat
Member

161

10-20-2023, 07:03 PM

I was keeping an eye on my system and noticed something unusual. The Ryzen Master indicated the VDDCR_SOC voltage is 1.25V (auto in BIOS), while SOC Telemetry Voltage reads 1.24V. HWiNFO shows CPU VDDCR_SOC at the same 1.25V, and under CPU VCORE SoC it lists a range of 1.272–1.284V. I’m quite puzzled by these differences and want to know if they’re normal or if something needs attention.

Cecelmat

10-20-2023, 07:03 PM #1

GingaJamm
Member

10-20-2023, 07:31 PM

They might not be safe because of potential risks or dangers involved. Your concern about them being dangerous shows you're paying close attention to their behavior.

GingaJamm

10-20-2023, 07:31 PM #2

They might not be safe because of potential risks or dangers involved. Your concern about them being dangerous shows you're paying close attention to their behavior.

Viridian
Member

168

10-22-2023, 05:53 PM

I came across reports that X3D chips were overheating and potentially damaging themselves.

Viridian

10-22-2023, 05:53 PM #3

I came across reports that X3D chips were overheating and potentially damaging themselves.

Fatryx
Member

235

11-11-2023, 03:03 PM

It was fixed about a year ago with a BIOS update.

Fatryx

11-11-2023, 03:03 PM #4

It was fixed about a year ago with a BIOS update.

SlimeySkills
Member

11-11-2023, 06:33 PM

Yeah, that's old and was only one main vendor IIRC. Something to ask about BEFORE buying

SlimeySkills

11-11-2023, 06:33 PM #5

Yeah, that's old and was only one main vendor IIRC. Something to ask about BEFORE buying

KidWatermelon
Member

133

11-11-2023, 07:15 PM

The Vcore SOC differs from VDDCR_SOC, which is correct and addressed as noted. It must be set to 1.3V, with 1.25V as the standard.

KidWatermelon

11-11-2023, 07:15 PM #6

The Vcore SOC differs from VDDCR_SOC, which is correct and addressed as noted. It must be set to 1.3V, with 1.25V as the standard.

xXCossmanXx
Junior Member

11-11-2023, 07:36 PM

I wasn't aware of it at the time when I set up the system, honestly.

xXCossmanXx

11-11-2023, 07:36 PM #7

I wasn't aware of it at the time when I set up the system, honestly.

Cierian55
Member

11-12-2023, 02:36 PM

Your device is operating smoothly and securely. Are you currently using EXPO for memory management?

Cierian55

11-12-2023, 02:36 PM #8

Your device is operating smoothly and securely. Are you currently using EXPO for memory management?

Marco705
Junior Member

11-18-2023, 08:49 PM

I'm at EXPO.

Marco705

11-18-2023, 08:49 PM #9

I'm at EXPO.

Furia1ifegames
Junior Member

11-20-2023, 01:19 AM

#10

Nice to hear that your memory clocks are set to 3000 and CL30. Just checked the section—everything looks fine.

Furia1ifegames

11-20-2023, 01:19 AM #10

Nice to hear that your memory clocks are set to 3000 and CL30. Just checked the section—everything looks fine.

Pages (2): 1 2 Next