F5F Stay Refreshed Hardware Desktop Sixteen new PC configurations lack guidance on where to begin.

Sixteen new PC configurations lack guidance on where to begin.

Sixteen new PC configurations lack guidance on where to begin.

H
hdoor20
Senior Member
Find
477
07-28-2023, 12:55 AM
#1
I recently purchased several components for a PC setup and spent a lot of time researching online. On the first boot, it showed 60 error codes: CPU codes (18), memory codes (29), VGA codes (10), and HDD codes (3). I followed the instructions carefully, managed to enter BIOS before the screen warned about safe mode (likely due to the codes), and everything was labeled properly. I’m new to this, but I’m trying to figure out the best path forward.
Reply
Reply
H
hdoor20
07-28-2023, 12:55 AM #1

I recently purchased several components for a PC setup and spent a lot of time researching online. On the first boot, it showed 60 error codes: CPU codes (18), memory codes (29), VGA codes (10), and HDD codes (3). I followed the instructions carefully, managed to enter BIOS before the screen warned about safe mode (likely due to the codes), and everything was labeled properly. I’m new to this, but I’m trying to figure out the best path forward.

Reply
Reply
A
addiblythe
Junior Member
Find
17
08-14-2023, 06:40 AM
#2
The board displays numerous codes during startup before functioning correctly. It seems like a warning system indicating potential problems, much like debug indicators on other boards: they illuminate in sequence until the process finishes. Likely, everything is fine.
Reply
Reply
A
addiblythe
08-14-2023, 06:40 AM #2

The board displays numerous codes during startup before functioning correctly. It seems like a warning system indicating potential problems, much like debug indicators on other boards: they illuminate in sequence until the process finishes. Likely, everything is fine.

Reply
Reply
L
Lordlochie
Member
Find
214
08-14-2023, 08:59 AM
#3
It will go through error codes during startup, which is normal. These codes indicate the stage of booting, helping you identify the problem if it stalls. The safe mode light usually means XMP or similar settings weren't activated correctly. Consider updating the BIOS to potentially resolve the issue.
Reply
Reply
L
Lordlochie
08-14-2023, 08:59 AM #3

It will go through error codes during startup, which is normal. These codes indicate the stage of booting, helping you identify the problem if it stalls. The safe mode light usually means XMP or similar settings weren't activated correctly. Consider updating the BIOS to potentially resolve the issue.

Reply
Reply
I
ii_Gx
Junior Member
Find
12
08-14-2023, 09:27 AM
#4
You're seeing a screenshot that matches what you expect, which means everything should be working correctly. Just press F1, save the file, exit, and continue with installing Windows.
Reply
Reply
I
ii_Gx
08-14-2023, 09:27 AM #4

You're seeing a screenshot that matches what you expect, which means everything should be working correctly. Just press F1, save the file, exit, and continue with installing Windows.

Reply
Reply
J
jklim101
Member
Find
209
08-14-2023, 06:10 PM
#5
It's been a while since I assembled a computer, which is why I had to dig deep into the latest tech. The process turned out to be quite involved. Updating the BIOS usually means connecting your motherboard to a USB port, then using the Asus website to find your specific model and make the necessary changes. After applying the updates, you might see a message appear on the board's LED display—though I'm not sure what it signifies.
Reply
Reply
J
jklim101
08-14-2023, 06:10 PM #5

It's been a while since I assembled a computer, which is why I had to dig deep into the latest tech. The process turned out to be quite involved. Updating the BIOS usually means connecting your motherboard to a USB port, then using the Asus website to find your specific model and make the necessary changes. After applying the updates, you might see a message appear on the board's LED display—though I'm not sure what it signifies.

Reply
Reply
K
KR4TOS
Member
Find
193
08-16-2023, 02:03 PM
#6
I'm familiar with setting up Windows via a USB drive. You can access the installation media through BIOS and boot from that USB device. I searched online, but most results were about updates or using another computer to download the OS.
Reply
Reply
K
KR4TOS
08-16-2023, 02:03 PM #6

I'm familiar with setting up Windows via a USB drive. You can access the installation media through BIOS and boot from that USB device. I searched online, but most results were about updates or using another computer to download the OS.

Reply
Reply
K
Kiceity
Junior Member
Find
14
08-26-2023, 04:26 AM
#7
Have you prepared the Windows installation media on the USB drive from another device? Note: I assume you're asking if you've already done this on a different PC. If yes, just plug the USB in and start the computer. Don't use any ports marked "flashback" or similar. On most systems you don't need to adjust the boot sequence anymore, though if issues persist, you might need to change it.
Reply
Reply
K
Kiceity
08-26-2023, 04:26 AM #7

Have you prepared the Windows installation media on the USB drive from another device? Note: I assume you're asking if you've already done this on a different PC. If yes, just plug the USB in and start the computer. Don't use any ports marked "flashback" or similar. On most systems you don't need to adjust the boot sequence anymore, though if issues persist, you might need to change it.

Reply
Reply
E
Ender_Craft47
Posting Freak
Find
866
08-26-2023, 04:56 AM
#8
Thank you for the encouragement. I’ll consider all suggestions over the next few days and then follow up.
Reply
Reply
E
Ender_Craft47
08-26-2023, 04:56 AM #8

Thank you for the encouragement. I’ll consider all suggestions over the next few days and then follow up.

Reply
Reply