F5F Stay Refreshed Hardware Desktop Six short sounds, no post-stop, restarts when powered on

Six short sounds, no post-stop, restarts when powered on

Six short sounds, no post-stop, restarts when powered on

V
vDnorth
Junior Member
35
04-14-2025, 12:19 AM
#1
I assembled it using parts I already had, which resulted in about six short beeps, restarts, and then it would loop indefinitely every time I powered it on. I didn't suspect problems from incompatible components or a weak PSU, since it had been functioning well for months before failing. A forum user mentioned six beeps indicated a GPU failure, so I removed the GPU and used igraphics, but the issue persisted. I also checked the RAM and CPU power cable connections, yet they didn<|pad|>'s help.
V
vDnorth
04-14-2025, 12:19 AM #1

I assembled it using parts I already had, which resulted in about six short beeps, restarts, and then it would loop indefinitely every time I powered it on. I didn't suspect problems from incompatible components or a weak PSU, since it had been functioning well for months before failing. A forum user mentioned six beeps indicated a GPU failure, so I removed the GPU and used igraphics, but the issue persisted. I also checked the RAM and CPU power cable connections, yet they didn<|pad|>'s help.

A
Avent24
Member
61
04-21-2025, 03:16 AM
#2
Interesting signals. Most systems don’t rely on beep codes anymore. They usually require checking the manual for meaning. These codes resemble Morse code with long and short tones. Today’s boards often only display limited codes, mainly for memory or power issues—typically indicating serious faults. Post codes appear before startup, so you don’t need a hard drive installed for that. It’s likely a hardware issue on the board itself. Consider resetting CMOS and testing again. If that doesn’t resolve it, a hardware upgrade would be beneficial. “Old” isn’t very descriptive.
A
Avent24
04-21-2025, 03:16 AM #2

Interesting signals. Most systems don’t rely on beep codes anymore. They usually require checking the manual for meaning. These codes resemble Morse code with long and short tones. Today’s boards often only display limited codes, mainly for memory or power issues—typically indicating serious faults. Post codes appear before startup, so you don’t need a hard drive installed for that. It’s likely a hardware issue on the board itself. Consider resetting CMOS and testing again. If that doesn’t resolve it, a hardware upgrade would be beneficial. “Old” isn’t very descriptive.

G
gamer2hokv
Member
198
04-21-2025, 04:52 AM
#3
Reviewed the motherboard manual, but no explanation for the 6 beeps was found. Shared a parts link at the beginning of my post; if it doesn’t work, I’ll add a screenshot. Running Windows 10 x64, considering clearing CMOS to troubleshoot.
G
gamer2hokv
04-21-2025, 04:52 AM #3

Reviewed the motherboard manual, but no explanation for the 6 beeps was found. Shared a parts link at the beginning of my post; if it doesn’t work, I’ll add a screenshot. Running Windows 10 x64, considering clearing CMOS to troubleshoot.

C
Chalael
Junior Member
18
04-28-2025, 04:13 AM
#4
Can’t overclock without risking overheating with the small cooler. Resetting CMOS might fix it, but it could affect performance. Memory behavior is unclear—I think there are two versions. Updated August 23, 2022 by Bombastinator
C
Chalael
04-28-2025, 04:13 AM #4

Can’t overclock without risking overheating with the small cooler. Resetting CMOS might fix it, but it could affect performance. Memory behavior is unclear—I think there are two versions. Updated August 23, 2022 by Bombastinator

T
Tropicalli
Member
91
05-02-2025, 12:37 PM
#5
I don't OC it, so "cooler" is okay. I purchased a different type of memory that worked with another stick I already had, so I used both. Reset the CMOS and it didn't beep when turned on, but it still didn't POST and shut down after a while. Checked the video cable—it was fine. I was testing various RAM setups when the beeping and bootloop started again. Tried resetting the CMOS again, but the problem persisted. Confused.
T
Tropicalli
05-02-2025, 12:37 PM #5

I don't OC it, so "cooler" is okay. I purchased a different type of memory that worked with another stick I already had, so I used both. Reset the CMOS and it didn't beep when turned on, but it still didn't POST and shut down after a while. Checked the video cable—it was fine. I was testing various RAM setups when the beeping and bootloop started again. Tried resetting the CMOS again, but the problem persisted. Confused.

S
Scra3mITout
Member
222
05-03-2025, 10:05 AM
#6
You should consider using it if you're looking for anything beyond old-school games on that device. Unless you opt for a thin client setup, it doesn't matter much. If it didn't get posted, there should be a way to provide a postcode. A display, a sequence of lights, or something similar would work.
S
Scra3mITout
05-03-2025, 10:05 AM #6

You should consider using it if you're looking for anything beyond old-school games on that device. Unless you opt for a thin client setup, it doesn't matter much. If it didn't get posted, there should be a way to provide a postcode. A display, a sequence of lights, or something similar would work.