F5F Stay Refreshed Hardware Desktop shuts down the game Apex Legends

shuts down the game Apex Legends

shuts down the game Apex Legends

Pages (2): Previous 1 2
B
btert
Junior Member
11
06-29-2020, 12:47 PM
#11
Power requirements shouldn't be the main concern. Even with several power rails, 850W is more than enough. With 80% efficiency, the apparent wall draw will be significantly higher than the actual internal consumption. This is still uncertain, but could your BIOS version be outdated? I experienced many instability problems with the B550 (not the 450) chipset until I either turned off XMP or updated the BIOS with the newest release. Specifically, the problem in the BIOS relates to AMD's AGESA framework, an API used for initializing mainboards. As part of such mainboards' BIOS, AGESA handles the setup of CPU cores, chipset, main memory, and the HyperTransport controller. The 450 model might be more affected by memory speeds than the 550, even though the memory controller is likely built into the CPU die.
B
btert
06-29-2020, 12:47 PM #11

Power requirements shouldn't be the main concern. Even with several power rails, 850W is more than enough. With 80% efficiency, the apparent wall draw will be significantly higher than the actual internal consumption. This is still uncertain, but could your BIOS version be outdated? I experienced many instability problems with the B550 (not the 450) chipset until I either turned off XMP or updated the BIOS with the newest release. Specifically, the problem in the BIOS relates to AMD's AGESA framework, an API used for initializing mainboards. As part of such mainboards' BIOS, AGESA handles the setup of CPU cores, chipset, main memory, and the HyperTransport controller. The 450 model might be more affected by memory speeds than the 550, even though the memory controller is likely built into the CPU die.

G
Goku_Jerome
Senior Member
428
06-29-2020, 07:47 PM
#12
I refreshed the bios after upgrading from 2700 to the 5900x version
G
Goku_Jerome
06-29-2020, 07:47 PM #12

I refreshed the bios after upgrading from 2700 to the 5900x version

E
electrodude44
Member
143
06-30-2020, 01:53 AM
#13
Could your power supply extensions cause any problems?
E
electrodude44
06-30-2020, 01:53 AM #13

Could your power supply extensions cause any problems?

S
SamaMonster
Member
178
06-30-2020, 06:54 AM
#14
Your PSU is working well... around 400 watts should suffice, at least 300. Your chip rating is 100, which is sufficient... Should it automatically shut down or reset suddenly?
S
SamaMonster
06-30-2020, 06:54 AM #14

Your PSU is working well... around 400 watts should suffice, at least 300. Your chip rating is 100, which is sufficient... Should it automatically shut down or reset suddenly?

M
MariaT
Junior Member
1
06-30-2020, 10:33 AM
#15
I need to press the button to switch it back on.
M
MariaT
06-30-2020, 10:33 AM #15

I need to press the button to switch it back on.

3
321kevin321
Junior Member
2
06-30-2020, 02:43 PM
#16
It's puzzling; I'm not sure what might be causing this. I should look into the Event Logs on Windows for any clues. Are there signs of a hard shutdown? Do you notice the relay clicking off abruptly as if power was cut? The chances of it being the extension cables are very low. It seems like power delivery might be failing or the board is trying to shut down automatically due to overheating or other issues. Anyone know if the board can switch pins for startup/shutdown in overheat or error conditions on the 24PIN ATX power? I'm pretty sure it's not the power supply since you've tried another one and 850W is more than enough.
3
321kevin321
06-30-2020, 02:43 PM #16

It's puzzling; I'm not sure what might be causing this. I should look into the Event Logs on Windows for any clues. Are there signs of a hard shutdown? Do you notice the relay clicking off abruptly as if power was cut? The chances of it being the extension cables are very low. It seems like power delivery might be failing or the board is trying to shut down automatically due to overheating or other issues. Anyone know if the board can switch pins for startup/shutdown in overheat or error conditions on the 24PIN ATX power? I'm pretty sure it's not the power supply since you've tried another one and 850W is more than enough.

X
xxdreaaxx
Junior Member
43
06-30-2020, 03:51 PM
#17
I understand you're looking for more information about Windows logs and specifically Kernel Power Event ID 41.
X
xxdreaaxx
06-30-2020, 03:51 PM #17

I understand you're looking for more information about Windows logs and specifically Kernel Power Event ID 41.

V
VortexAh
Member
160
07-01-2020, 06:54 AM
#18
Someone questioned why my PC stopped behaving after I installed an AIO. I wasn't sure if a bad mount or insufficient cooling was the issue, but it seems resolved. Thanks for your help!
V
VortexAh
07-01-2020, 06:54 AM #18

Someone questioned why my PC stopped behaving after I installed an AIO. I wasn't sure if a bad mount or insufficient cooling was the issue, but it seems resolved. Thanks for your help!

Pages (2): Previous 1 2